diff --git "a/3_Logistics_Organization/narration_transcript_logistics_organization.json" "b/3_Logistics_Organization/narration_transcript_logistics_organization.json" new file mode 100644--- /dev/null +++ "b/3_Logistics_Organization/narration_transcript_logistics_organization.json" @@ -0,0 +1,392 @@ +[ + { + "category": "logistics_organisation", + "name": "User_1_411_1810_EFM3D_480.mp4", + "transcript": " okay so i'll just start by just in this chair on this side here inside and clean up the computer lab place this here So easy use later on and try not just this. clamp it down it doesn't move okay and now it's held rigidly in place and I'm also going to clean this up all the unnecessary mess. Carefully. Cleaning what I can. and throw it in the trash here and also pick up these fallen pieces take this ladder and set this up here inspecting the system ok now it is attached slightly better this also I'm going to place here carefully behind the trolley assembly here and with this I'm going to go to the other room first and battery is now at full capacity so i'm going to attach this and prepare the boxes the drilling machine Perhaps that might be easier if I place these different tanks in different locations Also place the drill bits in along with the user manuals lock it in it's carefully locked gloves are carefully laid out to the side So what I can do now is take the crawly out the corridor. to attach this, detach this machine and also, detach the camera from the camera system. Switch it off and also carefully placing it back leaving this this assembly should be adjusted a little bit same with this block i'll also move this to the side here for the time being this sanding paper should be here this plastic packaging should stay here and these should be thrown away It is the computer. Okay, this toolbox should be positioned inside properly. The drilling machine can be placed here. I'm gonna adjust the bars a little bit safer onto the side so that it is less intrusive and I think these slight adjustments the room is a bit cleaner Also going to adjust this here for now. Going to move this into this room. This key should not be there but rather here. And this key should be here I believe." + }, + { + "category": "logistics_organisation", + "name": "User_1_1810_EFM3D2_480.mp4", + "transcript": " okay I'm going to start collecting different items from here and bring them back to the lab unfortunately for later use and inspection they cannot remain here carefully pick this up and leave this here and push this and also carefully leave this in here now for the second assembly I need another pair of objects so here are also some objects from the lab which should be brought back and some tools that should not be here So I'm going to bring the tools out. I'm going to clear this table. and push this trolley outside take it with me and perhaps pulling is better and for the computer I'm gonna grab this along with the handles and carefully place this here push this and In this room and first of all, place this here. just gonna lift this up for a power connection check you can use this here and first maybe adjust the seats a little better Make sure it aligns well. See on these sides. okay for the power connection i don't have a computer cable so i can find one here in this lab perhaps or in this lab this should be useful Connect this to the power source and I'm going to perform a check. Okay, it works well. So I'm going to shut this down. disconnect the power cable uncoil and plug it out and take it back here perhaps I can slowly lower it down here okay I'm taking this out I'm going to just leave the thing here and adjust this dial back here. I'm going to take the computer back in this room. and i'm going to leave it here but before i do that i just need to make sure that i haven't left any tools here okay and to take this out with me as I collect the different tools quickly place this on here Otherwise this orientation might be slightly better. Inspecting the different systems. Looks OK. OK. The shoes should be picked up from here. quickly go in this room I'm going to check if everything is okay and leave this here also position this here and use this box just measuring tool so what assembly is it attached okay here in this room in this lab oh yes these can be moved to place this here on the side carefully inside and also set this up" + }, + { + "category": "logistics_organisation", + "name": "User_1_1910_EFM3D_480.mp4", + "transcript": " I'm going to arrange and adjust some things around here and study up the workplace and organize things a bit better. I guess the first thing that I can do is make sure that things are turned to their original place. to place this here for the time being and also inspect different things in this place for example this should be returned back and carefully placed here also going to fold this bag leave this here as far as this tool is concerned it belongs in here let's open this i just sent things Okay. Place this here and Here I'm going to attach the camera so remove this and place it here for the workstation again first place it on the trolley and carry it with me. I'm just going to bring it into the room carefully and try and maneuver it I think this is locked so yeah a bit better maneuver it again and adjust this slightly and bring it in can leave the cable here to leave this here temporarily and place this alongside I think it is better left with the computer for now so I'm going to gently lower this very gently very gently so I don't cause a sudden jerk or okay and I can place this here and it is inverted so i'm going to position this correctly and move it in and leave the spare gpu and the connection cable here okay leave this in here for the time being and put these in place The tripod will first lower the tripod stand, this vertical arm, so that I can transport it slightly easier. And then just take it with me. Leave this here for the time being and also then arrange the gloves and other things. I need to carry this for the work in the other lab. Reorient this and also carry this out. okay so i'm going to adjust the door carefully and move it in okay so need to carry this computer the working desk and first quickly inspect this and then close it up so I need allen key for that This one a sized allen key should suffice I'm going to lift this up to carefully handle this with ease. okay removing this as well and let's remove this and move this slightly to see it easier so you can see that everything is held in place I don't think this needs to be changed at the moment so I'm going to lock this up again and lock it in place once again after aligning it carefully okay here also the longer end, tighten it for the last end tighten the longer end to close this time being and once again release the brakes very slowly and put the computer back here. I don't know if anything else here needs to be rearranged or adjusted. use of the partition wall also appears to be a bit damaged going to close this position this here and also inspect this table sub-assembly it is still functioning properly after this week's work okay attach this and seems to work okay carry this with me and bring this out carefully and carry this In here. And adjust this slightly. It should be here. to clean up the working desk in this place I'm going to put this back. It's here and I'm also going to take a look at here in this workstation. this other system can be inspected and I see that this has been also kept here in place there's a need for adjusting this here I'm going to lift this up move it here to the side and just lock it here in place this sub-assembly can be placed here on the table a bit more care okay and this charger for the drilling machines i'm gonna put here two drilling machines are here but as far as the operation is concerned I can put it elsewhere and as far as the camera is concerned I can bring it back to this location and also put it safely in place in this lab. I'm looking for the cutter tool. Yes. Okay. Just going to see the list here. And then I'm going to carry the trolley out. Make sure that I did not forget anything here. Okay. Same with this room. Nothing was left behind. ok that operation is complete I am going to leave the trolley here for the time beam and call for the elevator" + }, + { + "category": "logistics_organisation", + "name": "User_1_2010_Organisation_480.mp4", + "transcript": " I'm going to start sorting everything and take this back to its original location. Carefully. put these on the table and bring this back to its station and just release the brakes very slowly and then I'm going to place this back here carefully and maybe I can also put the screws back here carry this over leave this here for the time being and put the rest of the things in place first of all the cable and also the zip ties should be here the wooden block should be in the cabinet These should be in the original drawer. So I'm going to take them from the drawer. This belongs with this and these belong in the drawer. I'm going to detach the phone and remove the plate and also put this back in along with the rest of the tools and also place the tripod stand properly in the lab here for future experiments perhaps Going to use this table to transport, use the trolley to transfer the table back into the room. And I'm going to carefully load it. and once this is loaded i'm going to carefully push this and try and carry it to the lab okay however this is quite heavy for one person to carry properly so it needs extreme care remove this here and for the rest of the tools I'm going to carefully place them here the table and move this in and to carry this sub-assembly computing units back and place them on the table if i put this cleaning cloth back carefully and these parts i can leave here for the time being with this part of the lace being clean I'm going to take the trolley out and leave this here these parts are all also complete so I'm going to Bring the trolley back to the elevator and put it back." + }, + { + "category": "logistics_organisation", + "name": "User_1_2110_Organisation_480.mp4", + "transcript": " I'm going to start organizing the place a bit better this belongs in the tools along with the other stuff this is the zip ties i'm going to put them in here these i'm going to lay them here the other tool the sandpaper measuring tool leave it here and sandpaper can go here the clamping tool is here and i think that we can i believe take this back at least these tools layer them to the side first smaller nails this i'm going to throw in the trash this this i'm going to put here along with the other tools Leave the prototype here. this tool belongs in the drawer and these I can bring them back this first of all I can also put here the rest of the tools and carry this out with me" + }, + { + "category": "logistics_organisation", + "name": "User_1_elevator_1_trial_480.mp4", + "transcript": " Thank you. Thank you." + }, + { + "category": "logistics_organisation", + "name": "User_1_H_pal_transport_Nar_480.mp4", + "transcript": " I'm going to carry this pallet truck with me for a task. So I'm going to release the brake and carry this along. Maybe I can do a quick test first to see if it is functioning and raising the floor properly. I see that it is working just fine. So I can release the brake and I'm going to carry this with me. carefully carry it along. Seems to work. Okay." + }, + { + "category": "logistics_organisation", + "name": "User_1_H_pal_transport2_Nar_480.mp4", + "transcript": " I'm going to bring this pallet truck downstairs. So first I can, upstairs actually, so first I'm going to release the brake and lower it and dry it out carefully. And carry this with me carefully. I'm going to park it here." + }, + { + "category": "logistics_organisation", + "name": "User_1_R_2610_Logistics_480.mp4", + "transcript": " I'm going to clear out this trolley from this workstation and first I can see that this is wobbling a bit so maybe I can tighten this just a little bit And also on the other end. Okay, looks tight enough. carefully placing this and carefully escorting this out of the setup I need to maneuver this so that I can get through comfortably. And I also need to clear out the setup. placing this here. And finally, I also need to check whether the other parts are remaining. I don't think so. So I can switch off the lights and leave the workstation. properly by checking all the requirements closing the door and carrying this to the elevator and I can fold this and carry this onto the trolley just load it on there and this i shall also carry to the elevator and I will bring the trolley there it is carefully carrying this so as to not let anything fall Open the elevator door. and placing this and holding the door open and putting the trolley in safely. I will lock the legs so that it doesn't move. and I will now unlock the leg the wheel first of all push the trolley out and then carry the tripod Carefully carry the trolley and carry it out. carefully carrying it out opening the door and putting it into the lab carefully And I will also bring the tripod here. open the door and carefully carry the trolley across and also place it here in the lab I will unpack the various belongings first of all the tripod the documents and the different tools I believe the toolbox may be in need of rearrangement because some things might have moved to the transportation so I'm going to check yes so looking at the matching patterns I'm going to place the items that they should belong this seems too small this is 11 so it belongs in 11 and this is 10 this seems about right and this seems to be 17 so these parts and I can see that some parts are missing unfortunately but this is 11 needs to be placed upside down this tool is stuck in here and this tool is supposed to be here and this tool perhaps here this tool should be at 16 16 is already occupied this is 14 so this is probably incorrect this is 10 so first placing 16 safely here 14 securely for 10 i will swap out the shapes first and i will check this this appears to be 12 this is 15 once again correctly placed this is 13 and this is 15 so this is now correct this belongs here there are some tools that are missing but for now i think the configuration appears correct placing this in and these allen keys that are extra I'm going to place them here and perhaps also leave it here for future use closing the case and I will leave the trolley here on the side I will lock its leg so that it can be held in place here" + }, + { + "category": "logistics_organisation", + "name": "User_1_User_15_0111_1_480.mp4", + "transcript": " Yeah. Thank you. I have to have the same, so exchange. Next, I have to retrieve the trolley, so let's just check if it's there. OK, we have the trolley. It also seems to be pretty empty, so we can start with the next steps. First, we need to check the devices and mark them. And after we are done with that, we can put them in the trolley. So you can take these for marking and labeling. And I think we also need, um, I think that should be enough for now. So I think the first, uh, thing we need to find is the Mac computer. And then also there are these other computers in different rooms. So let's see if we have something here. So here's the first computer. I think what we need to do is first test if it is working with the power cable. And next, if it is working, regardless of it is working or not, we need to open it and check if any components are missing, such as the battery or the RAM chip or the graphics card connections. and then label it accordingly so first we need to find the power cable so here's one let's start with this connect this here OK. Yeah. OK, so I think the first label then we'll put is usable. and we also then need tools to open the setup and inspect it so i think for the inspection we can place it here perhaps and you can start with the inspection and i'll look for the other tools other computers from here basically yeah okay Let's use the second computer. and the cable so I think The ramp chips are there. The battery is also there. The connection seems to be fine. So I think then the no missing parts. And we also put a second label. It's not working. The battery is missing and the power connection is also out. So for this computer, I need to put two labels first. It is not working, so it is defective. And second, also parts missing because it is missing the battery. We should be able to close it now. We'll keep this here for collection later. Printer and the monitor. We need the power cable first for later use and also the marker. check here here's the mac pc i think first thing we can directly notice is that it is missing some screws so table that and all right so let's just check It seems usable. Yeah, I think we need to open it and check once to make sure that we don't have other parts missing. You can put the two labels and I'll find the suitable. OK. Then let's check. It is missing a RAM chip. And I think other components seem fine. Let's close this up. So we have the monitor and the printer here for the monitor. Let's check if it starts. so it is defective and as far as the outer body is concerned there are no missing parts okay let's just move this cable you put this cable to the side is usable let's quickly inspect I think it is missing some electronic parts here specifically, so you can put a note here that it is missing parts, but usable. and now we have identified all the parts and sorted them so we need to put them in the trolley for collection And that's quite heavy, so it's better to do it. Yeah. Thank you. So we may not be able to fit. There's no way to lock the trolley? No. Yeah. So everything fits. And yes. So you can leave this here and then start with the second part where we are going to inspect mechanical devices. The first one is this. Hide adjustable frame. So At first glance, we see that the crank is missing. So you need to put the label missing parts and also put a second label exactly where the part should be. So a note saying crank. inspecting the other things I think everything is intact so we'll put this here for collection later and the next thing is the lamp we have here so it is damaged and specifically the light bulb seems to be not working And the mechanical assembly looks OK. So we'll take it out and also take the holder out for collection later. The next thing is the demonstrator assembly. and it's not here maybe it's in the other room okay yes here is the reference image so this is wrong it's also missing this gap here and also this cap at the top so you can put notes first missing parts and then everywhere there's a missing part also these bolts are missing Next we need to get the trolley ready, but we also need to get some additional bars and spare parts for the prototype ready in a zip bag. And we have some zip bags here. yeah i mean we pack the prototype bars and we pack some extra bolts in this This would also fit. Also a second note here, additional bars. Now we can fetch the trolley and maybe also leave the electronic parts in front of the elevator. Before I'm loading this, let's just start from here. And we will just line them up here in front of the. I think we need to change the description here because it's missing a foot here because it's not stable. Can you help me with this? This is the biggest part. It is not set correctly, so maybe we can turn this around. You can take off the belt. Nothing here. Can you add an additional node that this is loose? These are Then we have everything, and we can close the hatch. And maybe return the parts that we had, so for example, the notes and the marker. And the power cable is already returned, so we can place them here. And this is from that one, right? Yes. Let's wait for the collection person to collect it." + }, + { + "category": "logistics_organisation", + "name": "User_1_User_16_451_3101_Logistics_1_480.mp4", + "transcript": " OK. We should inspect all these parts first before shipping. So let's do one thing. Once we inspect them, we can put them to this side so that we know that they are inspected. okay they're all okay We don't need to cut all of it. Maybe just check if we can feel something. Something is broken or some loose parts. I don't think so. Okay. Yeah. yes all good it's all depackaged all okay I look in. Also good. We should just measure the maximum length so that we know that which parts could be I think roughly 72 centimeters as well should be fine I see the same dimensions and this one 74 75 so before we use this box let's just make sure that the max dimension is roughly 76 so it will fit Let's start packing everything in this box. Put it here. So what we can do is put this at the base. Yeah. Put this cardboard on top. And you also have these things. You can put them on the sides. Let's start loading Be careful I think we should tape this first Same with this. It's already packaged. and this also needs to be taped we're also sending this camera system which is very fragile, so we'll keep this here on top. And we don't have anything else to pad at the moment, so I guess we can close this as it is. We can put this now in the crate together and then start packing it. Is it placed well? I think so. Okay, then let's start by packing this from the top. Can you get the cutter? Let's wrap the foil around it. Hold it here. That's enough. I'm going to cut this. package this belt so we put on these belts Your build is much larger. You can also do two full rounds if you want. It's fitting in the wrong direction, I think, because Let's bring it down before we tighten this. OK. Yeah, here we can tighten this. Yeah, I think it is much tighter now. Let's test. yeah looks perfectly fine to me put this on top to maybe tape it up properly The shipment is prepared Now we can transport it" + }, + { + "category": "logistics_organisation", + "name": "User_1_User_16_451_3101_Logistics_4_480.mp4", + "transcript": " So we need to unpack this and inspect all the contents. So for that, let's start with the belts. Next, starting this off. OK, so let's inspect the list. Camera. So the parts look intact to me. There's no damage. Let's do one thing. Let's find a place to keep this box in here. keep it on the table perhaps now we can just put it there careful And let's also bring all the things from outside. Let me bring that and try and take this. Yeah, it should be fine. Thank you. The area is clear. The unpacking process is complete." + }, + { + "category": "logistics_organisation", + "name": "User_1_User_16_475_0801_1_480.mp4", + "transcript": " Then hand me the scissors. for today. Yeah. Go ahead. Put it here. So now we need to start unpacking this. And we have here Count of which parts we have and how many I need to check that so first can you open the smaller one and Check it should have the small connection parts It should be correct. I'm not sure if that says 46. The others are correct. Okay, so we can leave it B then. we also need to somehow count this this is the count so basically we should have we have different levels yeah 500 No, I think we should just refer to this. So I think this is the most important number, this length. So this is, I see that this is the first one is 254. So we can just mark it. This one is... yeah 254 is also there 500 yeah 254 then 670 I think it is best if we cut it and then just count it. let's let's do one thing so until now you have marked this is marked you put this here this is also marked 670 500 is marked which one 920 okay 920 254 is one marked right? yes this is marked? yes okay 670 254 500 670 920 920 and 1420 okay then this is 1420 again 670 670 again 1420 428 Again 428. 500. 500 again. 1420. 2050. once again 2 0 5 0 and this one ok ok 1 2 3 4 2 5 okay perfect all the parts are correct so let's do one thing let's sort out the waste all in the bin and put all the parts here just put it in this corner okay it's okay just put everything in this corner okay all right so check is complete" + }, + { + "category": "logistics_organisation", + "name": "User_1_User_16_H_3101_Logistics_2_480.mp4", + "transcript": " Okay, let's put on some safety shoes. Taking out the old ones. Put this in the sole and putting on the shoes. Tightening them. Testing. and put the old shoes away we can take this pallet truck I think it should be here yeah this one and take it upstairs with us Thank you. We need to bring it out to the main door, I think. I have to maneuver this a bit on this side. No, it was originally open. Check it out. Do it from here. Okay, that's enough I think. Yeah, press it. Okay, it's going through. We will take it to the shipping station. You can leave it here in this area. Try to put it in this block. Okay, that's pretty good. Yeah, I'm gonna leave the trolley over there. Shipment is perfectly fine. And the label is also firm. It's ready for shipment. The trolley is also put back. Okay, loosening the safety shoes. Okay." + }, + { + "category": "logistics_organisation", + "name": "User_1_User_16_H_3101_Logistics_3_480.mp4", + "transcript": " We have a new shipment so we are going to bring it first, safety precautions, safety shoes for the heavy objects. Putting on these shoes and tightening it. And sort the old shoes back. Around the glove. I'll grab the truck and maybe you can help me in the way somewhere. This is ours, right? Okay. You're going from here? Yes. OK. Let's switch. You could take another elevator on the other side, or? Hello. Oh, yeah. Yeah, like a bunch of cameras and stuff. Should make the way free for them. All right. I got this. Can I back it here? So you can turn this and I'll check the rest of the things. I can help you with the door first." + }, + { + "category": "logistics_organisation", + "name": "User_1_User_17_0411_1_480.mp4", + "transcript": " okay so let's put on the vest So first thing we do is check the trolley. The trolley is here. OK, so I think we can then move on to the next things. We need to first find the computers and test them. So specifically, I see we have this computer here. Need a power cable for this. I don't know if this should fit. I think that is not needed. I can keep that somewhere else. let's switch it on because i did not start so the instructions say that supposed to look for defective or usability so keep this with you i'm going to label this as defective Okay, and then let's see again. Okay. I need to open this up and inspect for different parts. Okay. So the battery is missing. these cables are also unplugged so the RAM is also missing and the third thing was detach cables so let's keep this here to the side for collection later Next one is this. So first I can see that the base is not clean so it is already damaged. But to open up the thing. see that the battery is already loose but there's a second battery here so this is an extra battery just keep this to the side power cable, data cable, I think it's in both I don't see any loose parts, but I think we should check this anyway. Okay. It's working. Just turn it off. Then I think we can close it but it is also damaged because the base is not proper okay let's also put this down here for collection later and then the next thing we need to check is this this is quite heavy so we need to carry it together there should be a power plug here ok so this is running just missing some things here there's also a little and check the message so it is running unusable Let's add missing electronics Here. keep this here for collection and keep this with you it should also be given the monitor is not here so find it elsewhere here's the monitor so i think we also need to test this with the power cable can you unplug the power cable from the other room and bring it here so no damage physically the power cables are loose and the battery is missing from here so I can put in the battery that I have here from Okay. So we also need to test this. Do you also still have the power cable? Yeah. So data cables not connected. And also power cable. So we can. No, it's the other way. but the data cables are missing so I'm going to detach this yeah first usable and uh then uh there's also other things yeah missing data cable you can also close this And also battery was missing, which was added separately, so it also had that. okay and through this here okay so we have i think inspected all of them uh one two three four five okay so then take a final look here No. Oh yes. You also need to inspect the embedded computing unit. This one. Plug this in. And also the monitor. I did not start, I think. So it is defective apparently. Can you turn it off? And then you need to open these up and test if something is missing. yeah just take this out if it's magnetic it would be helpful yeah it is loose and so yeah we can just take it off you can see that the ram is missing um so let's just um Close this and put the labels. Can you put the labels on this? and also defective. I think the others are tight. So then we can get the trolley and put everything in the trolley. So let's stop here. Let's open this. So let's start doing the things. I think the most difficult is this. So let's just start with this. Thank you. Yes. You can put the monitor here so that we have space for the other one. The other one is here and I will bring the remaining one. Yeah, so close it. Take the trolley back there. Careful. Yeah. OK, you can keep it here for the moment. Next task is with the mechanical devices. So first we check the height adjustable frame. It's in the other room. Yeah, get the sticker and the tape. Okay, someone has already inspected this, but we can check this again. They say it is damaged and also bolts missing. Let's check. Yeah, it doesn't work. but it's working from this end okay that is very strange Okay, so these two bolts are missing here and here. The plate is there. So let's check if we can repair it using any spare bolts. We have some spare bolts here. Let's do one thing, let's pull this out. Now we're just going to fit the bolts. Can I check again? OK, so that is then you need to add damaged. And also add here that the leg doesn't move, maybe here. We need to find the demonstrator assembly. There are some assemblies here but not the one that we are searching. I think we need to wear gloves because some parts may be sharp. so this is already this is these are this is loose this is also loose so i think we need to add missing parts and add label here bolts and also look at the reference image i think it's also missing the bar here and this is also wrongly placed so i think we just need to add a number of different things here and we also need to collect the prototype bars and spare parts Also this, this spare parts. Green lounge. the green lamp okay can you put this in the here's the lamp can you plug this in let's test it can you switch it on is it on i don't think it is on okay so it works okay uh can you plug it out let's just test because I think the assembly is wrongly made because this is spring should not be this should no this one this one is wrong because it is just falling it cannot stand properly let's see okay now it's a little better but it is still a little not stable no not stable so so you can add working but not stable maybe we can also just take it off for easy work let's take this out You can get the trolley empty for this. We don't need the marker and the tape anymore. So we can, can you turn this like this? Yeah. No, we need to pull it, not push it. Yeah. So no, no, wait. So we need to put all these here. careful okay let's move this inside let's take your gloves I think it will not fit so we need to fit it. Can you go in the other direction? Let's go there. Let's put it here like this. uh can you also add this but this is loose yeah this can also need to add the label here i think it's in that room Can you remove the bulb because the bulb is working, so. Yes. careful now we can wait for the collection person to come and get these we can stop" + }, + { + "category": "logistics_organisation", + "name": "User_1_User_17_H_2701_Logistics_480.mp4", + "transcript": " Okay, let's put on safety shoes first. Tighten them. Testing it and tightening again as needed. Okay, if it is comfortable. I'm also putting on gloves. Our task is to sort and store these electronic parts. and deliver them to the appropriate place so you can start moving this call the elevator fourth you All right, the trolley out. And yeah, we can take it to the 451, and you can light up the way. If you dig and look. Okay. carrying it to the appropriate work lab and orienting the place of the trolley opening the hatch we can also carry it inside properly. so this needs to be inspected take this cable and plug it in you see the monitor is already working yeah it seems to work put this in the trash sod this here for the time being and what about this here okay so this also is working not the answer thank you Maybe it might be slightly better to cut this. And inspecting this. Clicking the power card. yes it's also accepting signals this is clearly broken because it used to be inserted in this hinge So I think this might be damaged beyond repair. We'll keep this here for now. For the larger printer, maybe we can pick it up. so we will also put in the cutter it says it has missing electronics but it should still be usable so you can plug it in and yeah let's just check She's missing some components perhaps. okay so we can also place this down carefully okay and put this out to be thrown and we can saw the rest of the trash trash bin and close the hatch and carry this out Close the door behind me. Put it back to the original location and place the spare parts in this. You can move ahead and pull it with you. should be cleaned once some metal rubbish and also the scrap parts we have to put these spare metal and spare parts in this so what we can do is first just start placing all the parts in here yeah we can open the hatch Maybe just pick one or two items out. It's easier. It's from the old tripod. And that should be it. Close the hatch. Close the hole. Lock the hatch. Might need to push this in this direction. So the wheels can. Maybe. The wheels, unfortunately, are locked in this direction. No, they're locked. They don't move. So we'll have to push this inside. You just pull it to this side and just push it. Yes, I think that's enough. so it is staying steady no problems okay inspecting the other trolley it's also quite empty so you can just close the hatch seems to be broken from this side okay so we can take off the gloves if the job is complete also take off the safety shoes loosen them pull it out and loosen them And the task is complete." + }, + { + "category": "logistics_organisation", + "name": "User_1_VF_carry_480.mp4", + "transcript": " Wir arbeiten nicht gut." + }, + { + "category": "logistics_organisation", + "name": "User_2_User_1_0111_2_480.mp4", + "transcript": " Thank you very much. Here. Looks right. Yeah. Hmm? uh yeah okay bring it to the elevator and return cable the tape oh we'll bring it back i think the power cable was here right Okay, now the mechanical devices. I think it's the same, so we can leave it in. Yeah, I think so. Are your glasses too hot? Too hot? Okay." + }, + { + "category": "logistics_organisation", + "name": "User_2_User_1_0910_1_480.mp4", + "transcript": " Putting on the gloves. Okay, I can open the door here. And taking out the assembly table. and lift it place it onto the trolley closing the door I'm opening the door so that we can enter this room with the trolley. Mm-hmm. Okay. I'm taking the rod. The cord. And momentarily place this carefully at the sides. Door's already open. Might need some light. and we will need two cords to transport the bars Placing the bars on the floor. And coat them together. You can get this out and also place it on the trolley. Okay. If you could hold this. The... Yep. So now we can bind them together. Using this. Tighten up. Not tight enough. Now it's tightened and I can lift it onto the trolley and place it here. Okay. Is that enough? I'll prepare the trolley for transportation Thank you. Maybe we can clean this up. Please put things back. I can start pushing the trolley towards the elevator." + }, + { + "category": "logistics_organisation", + "name": "User_2_User_1_0910_2_480.mp4", + "transcript": " we can put on some working gloves again put on my gloves and then we will transport this to room number three This was the wrong entrance. This door is already open. I'm guessing the door is slightly small for the bars to successfully we're supposed to keep it and then we can. Okay. Moving this to the side. Here. And I will start. You can start with this perhaps. So first, tighten this. And And remove the blue cord. So I can bind the bars with the blue cord too. And this I will just fold it in my hands. So I guess we can carry the bars now. Let's put them back into room one. You can place this on the floor first. First what I can do is put this to your side so that you come tight. I can bind the bars with the blue cord first. I can push it to this side. And finally, we can also go to Start removing the cords. I can coil up the cords. Picking up a loose screw. There's also one here. Make some space for the plates. I think it would be a good idea to Place it here first. This one is heavy, so I'll place this one first. I'm going to place some Barsian to pair it. Those were all the bars. Okay, we can take the cords with us. And leave room number one. And we need to leave the pallet here. Maybe you can take some boots that are hanging. There's also one left and I can just like help by pushing this a bit. Thank you. taking the cords and bolts with me we're finished in this room so i'm going to close it up I'm going to place it here temporarily. And I can help with maneuvering. I'm going to prepare the space for the table. Place the table but it needs to be moved around to the other side. This brush is blocking. I can carry the trolley towards the escalator. Taking off the gloves." + }, + { + "category": "logistics_organisation", + "name": "User_2_User_1_1010_EFM3D_480.mp4", + "transcript": " Okay, first we can just put on some working gloves. You can open the door. You can hold the door here. Going to room three. We can put this here back to the other pieces. Closing the door. you can put the tools back where they belong clean up the working space some cables in the way Okay. coil this up and leave it on the desk here same for the mouse There's a pipe and a little assembly compartment component that we can put back in the cabinet here. cabinet again. it's a bit too heavy you can put the chairs back seems like cannot be done more okay turning off the lights and closing the door which also is occupied. Okay, thank you. Yeah, this room is okay now. Close the door. So to open the cabinets on the higher place, we have to rearrange the chairs to make space for the ladder. And I can step on the ladder Open the ladder for support. Open up the cabinet. It seems like here's space for the boxes. So now that the boxes are in this space again, you can close this up and step down from the ladder. okay so i can open this up and there also seem to be boxes on the table that can be put away in this cabinet here's space for that Put the chest back. I think these things should also be put back to the space on this side. Pick up the bars. and then since the other computers are busy you can leave the computer here and find a suitable space you can leave it under the table Pick up the PC and place it next to the other one under the table. take the trolley out turn off the lights and close up the door I believe the two rooms are done so we can stop mm-hmm pull off the gloves" + }, + { + "category": "logistics_organisation", + "name": "User_2_User_16_0111_1_480.mp4", + "transcript": " Okay, so safety gear first. I think that is in the next door. Okay. Okay. I think you'll have a small Oh, they're not the same. Does it fit you? Okay. Oh yeah, maybe you can over the jacket. All right. Thank you. You also? Yes. OK. yeah i think there's nothing that makes much noise i think this is in front of the elevator Then the electronics first Oh really? I thought we need to put the... In the end we have to gather all the things in here. So we can bring it to the hole. Maybe. But it also is a bit huge so it blocks the way maybe. We just leave it there. We can just put it here until we... And then carry the things by... Yeah, okay. Until we need that. Okay. We can leave it here. oh yeah we need to label it too okay so maybe you can look for the power cable that's also in the other room Yeah, I'll use this one. And then... Yeah, just plug it in and I will see if I can find the label things. It's not? Okay. So it's defaked. No, I have it here. You can just like tape it in here. Just want to quickly see if it works. Plug it in. Everything is plugged. defective oh yeah second node parts okay or missing parts as needed okay but this is the battery okay So, yes, it's a hard disk. It's connected, I think it's fine. So we're only missing a REM card. So it's defective and missing REM. RAM card. Okay. I think it's there. And just leave it here on the table, then we can carry it to the... Oh, whatever. This one, right? Is there a picture? Oh, okay. Okay, then can you take this? I will... i would just bring this to the trolley i would just i would just bring the trolley here in front of the elevator and then someone will pick it up oh okay But I will just bring the jolly here. Hello? Hello. I couldn't leave it there. Was it here? Huh. Oh, okay. Plugged." + }, + { + "category": "logistics_organisation", + "name": "User_2_User_16_0111_part2_480.mp4", + "transcript": " I think I tested it already and it works. Wait let me get it. I brought it in the other room. What? Oh, good. should we get like here right should we okay just put a note that that they are in this room Damaged. Black bolts. I think I saw it in... We can leave it here and then later put it in the trolley. Was it here? Hmmm... oh oh yeah so so we need to so this is obviously not functional so which means it's damaged yes Put a node here like missing a bolt. But here is missing bolt. Here is not functional. Bolt is also, it's already here. No, but the thing for screwing it in. I forgot to put the note on the other thing with the location of the bolts. Damaged? this one also not component I think the green lamp was in the room with the PCs. Can you turn on the light? But there's no bulb. No light bulb. Oh. Oh no, the springs. Doesn't work? Okay, doesn't work then. damaged springs i think with springs it's okay Next, we need to unload the devices. Unload the previously kept electronic devices in the corner opposite to the elevator. Yeah. The frame, I think it was there. Oh, okay. The bars are there. Some bars? Yep. And then also mark them, right? Right. There's no binder. Or we can use this for the... For the bolts and pins. The extra ones. So we need to bind them with a cord? Which cord? can use a ziplock bag we don't need the zip ties anymore when we have all right ziplock bag just put some parts in there Oh, yeah. Perfect. Oh, I just used this one. It's OK. but now that we're here we can already like I think we can take off our waste because now it's just pushing the trolley because we loaded everything already Okay, and let's do it there. Okay. Mm-hmm." + }, + { + "category": "logistics_organisation", + "name": "User_14_412_02024_1_480.mp4", + "transcript": " So today I want to load a trolley with some bars. So first I'm putting on my working gloves. So now I'm going to get my trolley and it's located outside. So I also need to take this belt with me. So this is my trolley and I'm taking it with me to another room. So first I need to turn on the lights. So now I'm going to get some bars. So now I'm going to bind these bars with this binding belt. So now I'm going to load my trolley with these bars. First I need to open the door. so now i'm loading these bars into the strolly so now i'm going to close it Now I'm taking it to another room." + }, + { + "category": "logistics_organisation", + "name": "User_14_412_02024_2_480.mp4", + "transcript": " So today I'm going to unload the trolley and this is my trolley. First I need to turn on the lights. And now I'm going to put on my working gloves. So I'm going to unload this trolley and it has a bunch of bars in it. So first I need to open the door. Now I'm going to take these bars out. Now I'm going to put them on the floor in order to remove this belt. Now I'm going to unbind it. I'm going to put this back here. So now I need to bring it back. So I'm going to put this trolley here. So I also need to put these bars back to another room. First I need to open the door. And I'm going to put them here. Now I'm going to remove my working gloves." + }, + { + "category": "logistics_organisation", + "name": "User_14_412_2709_1_480.mp4", + "transcript": " So today I'm going to organize my toolbox and this is my toolbox. I'm going to put it on the table. So now I need to open it. So it has two compartments. This one and this one, as you can see. So first I'm going to start with this compartment. So now I'm going to place this set of wrenches and I'm going to sort them according to their size. Like it's 22 and it should be placed, I guess here, yeah. 14 should be here. So I have placed all the wrenches according to their size. Now I'm going to place these guys inside this compartment. according to their size, like I said. So this one is 22 and this should be placed here. 21 should be here. 17 should be here. So now I'm going to sort these smaller ones. So now, now I'm going to place these wrenches and they should be sitting here, I guess. Yeah. And this guy should be pleased here, I guess. Yeah. So now I'm going to put these tools. That should be here. now i'm going to sort these screwdrivers no first i need to place these pliers over here i guess okay this should be placed here like this and this one should be here Now I'm going to place these screwdrivers over here. So now I'm going to place this spirit label here. And I'm going to place this guy here, like this. And this guy should be here, I guess. Maybe, but I'm not sure. so i'm not sure where should i put this one ah okay here so now i'm going to place these guys here and this is a pencil and it should be placed here like this And this is a sword and it should be placed here. And this is an island key and I'm going to put it here. so i have sorted my toolbox successfully i guess so now i'm going to close it like this this should be inside i also need to close this" + }, + { + "category": "logistics_organisation", + "name": "User_14_User_16_451_0402_1_480.mp4", + "transcript": " Put on the jacket, safety vest. I hurts too. So there is no pocket here, or there's one here. Take all the stuff out. You can give it to me. Yeah. It's almost 4 kg. It's 3.7. it's 4.7 yeah This looks lighter. You need more? No, I think we should close it. Take it. No, we should tap it. Yeah. Yeah. type these. So first, I think first we should stick that label or maybe later, yeah. It's already there. You can stick it back. Now we are going downstairs to get the trolley. Is it on? Yes. All right. All right. What's wrong? What's wrong? What's wrong? We can use this one. So we are taking the trolley upstairs I call all of it. now we load the trolley wait Wait, I can open the door. Mm-hmm. Mm-hmm. Thanks. Should we unlock it here? We untie the box or not? Untie this? No. Take off the clothes. And then shoes. And now I take off the clothes. Oh, my God." + }, + { + "category": "logistics_organisation", + "name": "User_14_User_16_451_0402_2_480.mp4", + "transcript": " Put on the jacket. I close the door I'm sorry. So we are gonna get the trolley. They're still there. Yeah. OK. Oh, quite sick. It looks fine, yeah. It's all right. So we are taking the package upstairs. I'll pull the elevator. Hi. I'll load the trolley. and we untie the ball i put it here Then should we take off the. This one. So everything looks good. It was here. During the recording? okay then take off the gloves so we are using this box to store the other things these bars Now take off the gloves. And the shoes." + }, + { + "category": "logistics_organisation", + "name": "User_14_User_16_451_0502_1_480.mp4", + "transcript": " put on the gloves I put on the safety vest Can you help me find the arm? Thanks. And the shoes. Should we empty the box? It looks good. Put it in the box. So it's almost 10 kg. How can I open it? I think we shouldn't open this one. It's already sealed. so we don't need it i'm gonna put it back Let's check this one. It's a bit different here. It's a little bit different, so we can use another one. Okay. This one looks the same. I put it back here. This is not the same as I put a chair. You can see this is a little bit gap. This is without gap, right? Yeah. We can use another one. Okay. No it's not the same, it's a bit different Let's check this one. It's totally different, I guess. Yeah. It's not totally different, but I think it's like a, yeah. Some gap here. Put it back. Backup option. Okay. It's expand. Should I put it back or? Yeah. Are you sure we need 10 boxes or 10 items? It's totally different. Thank you. No, they also have a gap. Most of them have a gap, I think. They also have a gap, right? Yeah. So I think we have to use the backup option to use this with gap. Okay. Thank you. It's 4.7. 6.1. 6.15. And it's 614. 614, yeah. Bye. No, no, no. shipping should we also tie it with the belts we can use this one How to tie this out or anything? Take off the gloves." + }, + { + "category": "logistics_organisation", + "name": "User_14_User_16_451_0502_2_480.mp4", + "transcript": " so we load the trolley I think we should turn it off. I think we have to. I open the door. Turn on the lights. Press H. Hmm. No lights? No. Hmm. Amen. I am... Just a little bit." + }, + { + "category": "logistics_organisation", + "name": "User_14_User_16_451_0502_3_480.mp4", + "transcript": " Let's collect the shipment. Get the trolley first. It's not damaged. It's all cool. Mm-hmm. Now we're taking the shipment upstairs. Mhm. Mhm. Mhm. I'm going to open the door. You could hear it. Oh. Hmm. Hmm. Hmm." + }, + { + "category": "logistics_organisation", + "name": "User_14_User_16_451_0502_4_480.mp4", + "transcript": " We're going to unpack it, the shipment. Should we use scissors? Mm-hmm. Looks good. Can you also check the others? Thank you. Yeah, that's cool. Looks good. Under the table. Check off the gloves and the shoes." + }, + { + "category": "logistics_organisation", + "name": "User_14_User_16_H_3001_1_480.mp4", + "transcript": " So first we are gonna put on the gloves. And then put on the shoes. Thank you. So now we are going to get the trolley. So we are loading the pilot It should be down More yeah Yeah. So now we are taking it to upstairs. So we are going to taking it upstairs. You wish I was in there? If you are in the elevator. Move the handle, crank. Is it on? So we are wrapping it up. We use two different sides. I think we should also cover these corners Wait, wait, wait, it should be covered like this Should we also wrap the legs or not? Okay. So it's for shipping information? Open the door. So we are taking the assembly out. Close the door. Now we are loading the trolley. Can you move it? Move it? Yeah. Thank you. Thank you. Thank you. I took all the elevator and we are taking it downstairs. I didn't get it, what is it? Okay. Thank you. So we are unloading it here. Lower it, yeah. Can you try the belt? No, you don't. It will make the shipment more stable. Should I load it again? when we are storing the trolley here. Should I leave it here? Mm-hmm. Ready to shape and tighten the package. Take off the gloves and the shoes." + }, + { + "category": "logistics_organisation", + "name": "User_14_User_16_H_3001_2_480.mp4", + "transcript": " Putting on the clothes. And now I'm putting on the set shoes. to keep out the shift mode. So we get the trolley. So now we load the trailer. Lower it, yeah. And we are taking it upstairs. I call the elevator. So we are getting out of the lab. Untie the table. Thank you. I'm going to take off the label. Should we turn it away? So we're bringing the bed downstairs. Thank you. and then get back to its original place. Mm. Yeah, still on. Mine too? Okay. Take off the gloves and the shoes. Should we bring the shoes back upstairs?" + }, + { + "category": "logistics_organisation", + "name": "User_15_410_2609_3_480.mp4", + "transcript": " Okay, so I'm going to first turn on the light so that I can see a bit more. And then all these tools were left out, so they need to be put back into this toolbox, which I have right here. So I'm going to open this up by first opening these two and then I can flip the lid open and we're going to start with the bottom part. So over here we can kind of see the shape which matches these wrenches and they have different numbers and those same numbers are on here. So I'll just start putting them back. So here we have a 17. which goes this way around. Put that in here. We have the number 13, which goes above the 13. We have number 11, which goes here. Then we have a number eight and a number 12. And this side is always a bit thicker and slanted, so you can see exactly where it's going to go. So it's 12 goes here. Number 10 goes up here. Here we have number 14, which has a bit of a weird shape. And then we have this big one, which is number 22. Okay, and then over here we also have for a wrench, we have all of these kinds of things and they are also numbered by their millimeter size. And they go in all of these holes. So I'm gonna put them there. This is number 19. And the slightly thinner part goes in here and the outer part sticks out. This is 22. This is number 21. This is number 17. This is number 18. We have number 10. Number 10. Number 12. Number 14. Number 11. number 13, number 16, and number 15. And now we can move on to these ones, which are slightly smaller. So we have number 10, number 7, number 5, number 12, number 13, number 11 number 4.5 this is again the millimeter size so this is four millimeters in diameter this is six this is eight and then the final two we have 5.5 and nine millimeters and let's see now this does not go here but we can look on these images and see that these pliers go here so for example these ones match this image so first i'm going to stick this part up here and then i can move the rippers into here and now it's secured the same with these these match this picture so i'm just going to slide it up first and then i can put it in here um these don't go there but this matches this and this big one this big wrench which you can use these different attachments to have different sizes goes here we don't have a hammer anywhere so that was already missing we also do not have a tape measurement Um, but these things, I'm just going to see where they match. So right here, this one would go right over here, this, um, here, and then these three things are also, it's just organized by size as well here, here, and here. We also don't have this part and we have wrench number 19 missing, but this went in here as well. I know that from before this goes in here. We also have this thing, which I'm not sure what it is. It's a knife. and that goes here as you can see on the image and usually you would have cable binders that would go here which we don't have and these two types of pliers which are also not here and now I can open this by turning this around and then this slides off and I can put this down and then I can see what goes here so first I'm going to put this saw back so I can just open this velcro put it back and then strap it back in here this spatula kind of thing is also with velcro I can just slide it back in and then fasten it with velcro usually we'd have a box cutter here but we don't have that today then these two pencils they can go in here and in here we have this big water level which goes right here as you can see so first i'm going to slide it into this elastic part and then because we can open this part up this comes second and i can fasten that there and then we have I'm going to move this out of the way so I can see better we have these um screwdrivers which have numbers so I'm going to see if I can match them up maybe but I don't really see the correct numbers let me look at this one Okay. So I'm just going to put them wherever basically. So I'm just going to put this one in here. I'm going to put this one up here because it's a bit smaller. and then the really big one I'm going to put at the bottom just so that it's organized by size so that goes here usually there are also a few more screwdrivers but I don't have them here right now and then these things they go in here so I can just slide them in as you can see from the image the pointy one goes here and the one with the flatter side goes over here and now all that's left is these pliers which I think go in here then so I'm also just going to slide those in there like so and now I'm just going to check that we have everything but we do and then I'm going to fasten this again by putting this on here turning this around so that it doesn't move and I can close the case now and it's all the tools are back and organized so I'm now putting this toolbox back And I can turn off the light and leave." + }, + { + "category": "logistics_organisation", + "name": "User_15_411_2309_3_480.mp4", + "transcript": " Okay, so to tidy my workspace, this small Allen wrench goes into this big thing. And then I'm going to take it and bring it over to the other room where it belongs, as well as my water bottle. And now I'm going to put this down here." + }, + { + "category": "logistics_organisation", + "name": "User_15_412_0110_3_480.mp4", + "transcript": " Okay so first I'm going to turn on the light and then I'm going to put on these steel cap shoes so that in case I drop anything it doesn't hurt my feet. So first I'm going to take my shoes off And then I'm going to slip into these shoes and then I can tighten them by turning, first pushing this thing down and then turning it to the right. So clockwise to tighten these strings so that it fits. And I'll do the same for the other foot. So first unzip my shoes and then I can take them off and slip into these boots. And here again, pop this thing down so that I can then turn it to the right to tighten them. Okay, now what I want to do is I'm going to take these gloves with me and what I want to do is I want to get a trolley and then pick up some bars and put them here to prepare for an experiment. So I'm going to get the trolley which is at the end of the hall. And the materials that I need are in room 410. So this room. So I'm going to open this and move the chair out of the way so that the trolley will fit through. And then I'm going to push this in there, hopefully, if it will fit. which I don't think it will. So I'm just going to leave this to the side here and then open up these clasps to let down this latch. And now I can go in here and I can move this ladder to the side so that I can open this cupboard. And we're just going to take some of the bars that I need out. So this one and this one, put these right here. I'm also going to need this one, this one, and this one. So I'm going to put them all together here and then I can use this to tighten them together so that they're easier to carry and I'm also going to turn on light so I can see better. Okay, first I have to untangle this and now I can use it to tighten this. So for that, I'm just going to stick this. First I'm going to press this down. Then stick the other end of this part through. And then hold on to these. And then pull it tight so that these are secure. And now I can close the store again. Move the ladder back. And I can, I'm going to put on my gloves to carry these. So now I can just pick this up and place it into the trolley. and then close the latch by closing these clasps as well. I'm going to turn off the light here and close the door and bring it over to my workstation. And I'm going to open this door more so it fits through. And now I can just open these clasps on either side to let down the latch to make it easier to lift the bars out. I'm going to pick these up. I'm going to pick these up and leave them Over here, I'm also just going to take this band off because I don't need it anymore. So for that, I'm just going to press on here and then it should slide right out. Like so. Just going to slide the rest of it out here. like this I'm done with this and I can leave this here for the next person I can close this up again and then fasten the latch again with the clasps on either side and then bring it back where I found it so I'm going to I can take off my gloves now and leave them here So I'm gonna bring this back to where I got it from. And open the door for that. Now I can bring this out. and put it back here for the next person to use. And I can also change back into my normal shoes. So to do that, I'm just going to need to pull this part out and then they're open and I can put on my normal shoes and just zip them up. Same on the other side. I can just pull this part out and that way they're open and I can put on my normal shoes again by zipping them up. And now I've brought the materials over here so I can just turn off the light." + }, + { + "category": "logistics_organisation", + "name": "User_15_412_0110_4_480.mp4", + "transcript": " Okay, so first I'm going to turn on the light so that I can see better. And then I'm going to change my shoes to these steel cap shoes so that in case anything falls, I don't hurt my feet. So first I'm going to take my own shoes off. and then put these on and by pushing this thing down and then turning it right I can tighten it so that it fits my foot and I'll do the same for the other shoe take my own off and then I can slip my foot into this one push this round thing down turn it to the right and tighten the shoe So what I want to do is I want to bring these bars back to where I got them the first time. So in order to do that, I'm going to need a trolley, which I'm going to go pick up now. So I'm just going to take this and roll it over to the other room. And I need to open the door so that it can fit through. Now I can open the clasps on either side to open the latch to make it easier to place the bars inside. And then I'm going to tie them together to make it a little bit easier to carry. So for that, I'm just going to stand them all up. I'll put them right side up. And that way I can now use this slack line to tie them together. So for that, I'm just gonna take the end of it and put it through here by pushing this part down. So opening that part up so I can pull the end of the line through. And now I can just tighten it. and pick it up a bit easier. Before I do that, I am going to put on some gloves though. And now I can pick them up and place them into the trolley. Now I can close this latch again. And then bring the whole thing over to the other room. And I'm doing this way around because the opening is on this side. And I can't actually get this trolley to fit through that door. So I want this to be as easy as possible. And now I can open this latch again using the clasps on the side. And open that. I can also open this door and turn on the light. The chair is already moved to the side so I have enough space to walk through. So now I'm just going to pick these bars up again and carry them over here where I can now take off the slack line by pressing on it so that the opening kind of loosens and I can pull the line out. It is stuck on some of these bars. There we go. And now I can put these back. So this one, the two big ones, I. They were right here, so I'm going to put them right back here and the others actually go into this cupboard, so I'm going to move the ladder aside so that I can open it and then take these three bars and put them back. And now I can close this cupboard again, put the ladder back and put this back. Um, and it was right here. So I'm just going to leave that here. Actually I am going to wrap it up a bit so that it's more organized. This is a bit hard to do with gloves, but just wrapping it around my hand so that it doesn't get tangled again or anything like that. And it's easier to store this way too. Okay. Now that I've done that, I can now bring the trolley back, so I've done it in this room, so I can turn off the light, close the door. And then I can put the latch back up. Close it with the clasps on either side. Like so. And put the trolley back where I got it from in the first place. So right here. And then I can also take all my protective gear off so I can take off the gloves. And then also my protective shoes. So in order to take these off, you just pull this round part out and you can slide them open and I'm going to put on my normal shoes again. The same on the other side, you just push, pull the round part out and then you can open the shoe tongue, I think it's called. And I can, I'm going to put on my normal shoe again. And I'm also all done in this room, so I'm going to turn off the light as well." + }, + { + "category": "logistics_organisation", + "name": "User_15_451_0702_3_480.mp4", + "transcript": " Okay, so today, since this PC, as you can say, is usable, but it is missing a data cable and a battery, it has to be sent into reparations. So I'm going to package it in this box, I hope. So first I'm going to actually measure if it will fit. So it is... oh that's the wrong end of the stick there we go it is about 50 centimeters long 18 wide and almost 50 high so let's see first let's check if it will fit here height wise definitely here's 18 that will also fit and that will also definitely fit okay So, let's take some of this stuff out so we can actually put that in. There we go, now we can move this. Go to the side. Ah, before I do that, so that people know what's wrong with it from the get-go, I'm going to write that down on here. So, usable, the data, cable, missing. And also the battery is missing. Let's fold that. Okay. And now I'm going to wrap the PC in this. okay and now we can lift it into the box maybe okay Actually, what we have to do is probably fit one side of this onto here and then we can lift that up. Like so. Alright. And then we'll put this on top as padding in a second. We're also going to use this to pad the sides properly. So I think two on each side should work. And then we'll just put this and then this on top. And this, okay. Now let's put this on top of here, close this up and then we can seal it. Maybe also on this side, just so that it's extra secure. Okay, and you can stick the shipping label on top. Okay, now I'm gonna put on some gloves. And we're going to lift this on top of the trolley. All right, and now we can take it to where it needs to go for shipping, which is downstairs. Open this up. Take it downstairs. I'm going to call the elevator to go downstairs. to go to the H floor. Okay. And now this goes over that way. Okay, I'm just going to drop this off right here, take the box, and then I'm going to place the trolley right here on this side, and that is it." + }, + { + "category": "logistics_organisation", + "name": "User_15_451_0702_4_480.mp4", + "transcript": " okay so today i want to pick up a package that was left here and then take it upstairs so first i'm going to put on my gloves and then i'm going to take this trolley to the drop-off station where the package was left so that is right here so i'm going to park the trolley And lift the package on. And now we can take it upstairs to unpack it. So I'm going to take the elevator upstairs. So I have to go to the fourth floor. And then we'll take this over to our room. Okay, there we go. Just gonna close this door. Okay, and now I'm gonna take the package off. Okay, this shipping label is now we don't need it anymore. So let's open this up. Okay. Okay, so this PC is usable, but the data cable is missing and the battery is missing. So I'm going to put that over here to make sure I don't lose it. And now let's take all of this padding out. There's also some on the sides here. Put that over here, off to the side. Okay, now let's lift this PC out. Okay, we have a slight issue here. I'm just gonna take this styrofoam out with it. Maybe that would be easier. There we go. Now this can go back. I'm just gonna put the rest of this just in here. because we will not be needing this box anymore. Put that off to the side. We can take the plastic covering off. Okay. Here it says again, battery missing and the data cable is missing, but it is usable. So I'm just going to leave that over here for the repair. Put this on top and we're done." + }, + { + "category": "logistics_organisation", + "name": "User_15_User_1_0111_1_480.mp4", + "transcript": " So the safety kit first. Then we have to get the trolley, right? Do we take it with us? First we need to check the devices and mark them. We can take these for marking and labeling. And I think we also need, I think that should be enough for now. So I think the first thing we need to find is the Mac computer, and then also the other computers. I think what we need to do is first test if it is working. So we need the cables. And next if it is working. and then label it accordingly so first we need to find cables It seems to be working. Okay. Turn it off again. Yeah. Where do I open it up? Just here? From here. Ah, so I have to, okay. Yes. So these are all not connected. This seems to be connected. The power cable is connected. so um the battery is also there the connection seems to be fine so i think no missing parts To put two labels first, it's not working so it is defective and it can also have parts missing because it is missing the battery. It's not a little bit more, I think. Now we need the Mac PC and the printer, I think. So usable but missing parts? Or missing screws? Yeah, I think we need to open it and check once to make sure that we don't have other parts missing. Oh, do we? No, you can just open it like this. Okay. Then let's check. It is missing a RAM chip and other components seem fine. Okay. Okay. Monitor and the printer here. For the monitor. So it's defective. As far as the outer body is concerned, they are not missing. Bye. Here, specifically, so you can put a note here that it is losing past. Excuse me. if you put them in the trolley collection. We should probably take it together. No, I haven't. Yeah, the knot. So we may not be able to fit. Maybe we can put the printer back here and then the monitor will fit right there. And then we can move this over. I think the other two will fit now. Should we close the latch or hatch? the part should be so i'm not saying crank anything else i don't see anything else missing So it was damaged and specifically the light bulb seems to be not broken. And the mechanical assembly looks... I think it looks correct. Looks okay. We'll take it out and... It's not here. Maybe it's in the other room. Here is the reference image. I think this one's wrong. This is wrong. And it's missing. It's also missing this gap here and also this cap at the top. So you can't put missing parts, and then everywhere there's missing parts. There's also one over here already. Oh, some zip bags that you meant. Now we unload the trolley. There. I think we need to change the description here because it's missing a foot here. Are these two? And this was from that room, right? Mm-hmm." + }, + { + "category": "logistics_organisation", + "name": "User_15_User_17_451_0402_1_480.mp4", + "transcript": " Let's lift this down. Okay, I think the packaging stuff, this we can leave in here. Okay, now we can put it on the pallet. Can you flip, can you, the pallet, the pallet? Yes. Okay. Yeah that's fine. I think if we do four, it's fine, right? Then we have to do some padding. Because we won't be able to close that. This? Or some of... I'll also put some of this Okay. Okay. Now the other onion. Maybe put it in the center. Oh. Now we need to get the trolley, I think. And then we can lift it on. Do you know where he put it? Maybe through there. You can check. Is it there? I think he probably forgot. Then I'll weigh the other objects. Oh, we also forgot the shipment label. Oh yeah, here. Maybe it's at the Versuchsfeld. lower it more? That's good, yeah. Yep. Then I will open the door for you. Yeah. I got it." + }, + { + "category": "logistics_organisation", + "name": "User_15_User_17_451_0402_2_480.mp4", + "transcript": " Thank you. Thank you. Okay. You can just leave that around the corner. Let's inspect them. Okay, now these can go back in. Oh yeah, that was at the bottom. Oh, was it? Yeah. Let's take these out. Was that in there too? Yeah. Okay. Okay. Now I just have to. Yeah. Yeah. Okay." + }, + { + "category": "logistics_organisation", + "name": "User_16_414_0612_logistics_1_480.mp4", + "transcript": " I'm in room 414 I'm going to pick up a wooden trolley from downstairs You see the elevator? Waiting for the elevator Choose the floor H. Arrive the floor edge. Go to find the wooden trolley. There is the wooden trolley. Take the wooden trolley. Get him into the elevator. Go back to the room. The floor fourth. Arrive at the fourth floor. Take the wooden trolley. Here is room 414. The door. The wooden trolley is able to go inside. You can try it. This wooden trolley can go inside. Make more space for the side door. Close the door. Turn on the light. Open the side. Open another side. Open it. What we're going to do is put the computer monitor devices and the printers in the trolley. First, take a computer and put them into the trolley. And then take another. And then take the printer. Take this. And put all pieces into the trolley. The monitor also. This is for the Dell product. This is thumbsome. This is HP. This is also thumbsome. from the last PC let me see we have enough place ok so I think Let's rearrange the position of each stuff. I'll put it here. Perfect. Check. Nothing left. Now close the side door. Close the gate. Close it. Close the other side. Close. Open the door. Take off the shawing. Turn off the light. Close the door. Take the trolley, the wooden trolley, to the room. There is a 412. Let's check. No. Small pieces in room 411 from the instruction. So here is room 411. Open the door. Turn on the light. Open the gate. See, we have printers, PCs, monitors. Sorry. All right, thank you. Put the devices into the room, under the table. Open the door. Close the door. this cable also belongs to the open the door put the adapter also next to it and close the door move to the next room So from the instruction, the room 410 is for computers. We take out the first computer. Open here for a while. Next space. Take out the first computer. Put them under the table. Next. Pick up the next computer. Also put them down here. Push in. Close the door. Turn off the light. Close the door. And for the other things, the monitor and the printer. Close the door. Take the trolley. Turn around. Open the door. 451. Use the key. Turn on the light. And move in. Move the trolley inside. Close the door. Move the table, move the chair to have more spaces. Take out the monitor. The first monitor is too high. Turn it a little bit. Move in. Another monitor. move next small PC to here next monitor also lower and put it in under the table and next the monitor also turn it around and put it under the table to make more spaces for the printer make enough space take off the printer and that's it close the gate one side another side open the door move the trolley turn off the light close the door and move the trolley Thank you. And carefully move the trolley. Thank you for help. And continue moving. Go to the elevator. Let's check. Computers 411, other 451 are under the table, and return the trolley to the original location. This is where it is, the H floor. Okay, the elevator is here. The H floor. All right, to the H4. Doors open. Push the trolley back to the position. The original position is here. So, park the trolley carefully. Yes. That's it." + }, + { + "category": "logistics_organisation", + "name": "User_16_451_0302_1_480.mp4", + "transcript": " Now I'm going to pack this computer and put this in the shipping area. Now I'm going to put the gloves on. now first gonna measure it size about 42 centimeters wide and 46 centimeters high they can definitely fit in yeah 246 this is 63 this is 70 almost 68.5 the other side is 18 this side is 23.5 so you can fit in this old box so now I'm going to First, with the folding to cover this computer. And so on. To protect this. it's covered now i'm going to use this let's see how to fit the best way to fit yes just inside this hole Let's move a little from downstairs. Let's see if we can fit another side. Let's move a lot so it doesn't fit. The best way is using this side. You can fit into the hole here. use some cover prevent from moving Okay, another side also. Fitting properly. Maybe this hand and this way. Yes. Now it can properly get inside. There's a little gap, a little bit better. And I'm going to the upper. This is for the handle. Nice. Yes. Okay. This is the best protection. Now I'm going to put this over the computer inside. Put the flame inside first. And then put the computer in. Let me think he can put it out first. At least we know how to with everything since it had to go like this okay so the only solution is let's go this It has to be like this. Manage that. Since these are the same height. I think there's another solution for this. Put this on your knees. And put another here. A little bit further. Through here. switch lead let's measure it measure it okay there's an idea They are all different. So let's choose either two smaller sides. There are the smallest sides. So either we can put like this. So the best choice would be this much. which makes this is the best choice. Let's see if this can fit. Let's try this out. It seems yes. Okay, now let's do it. Let's do one thing. Put this, and this, and this inside. Let's see if it can fit. So this is in no way. If that's so, we can cut a little bit. This is cut, which means, which it can fit inside. What I'm going to do is just put this inside. This is fixed. Take inside. As well as this one. Prevent it moving. Also here. In this case. inside of here and this stuck is here now it's not movable inside and this side is supposed to fit which is perfectly fits now I need to cover this up Press cover. Next. Fully in it. Cut it. Cut it. Cut it. Make sure it's covered by the folium. Yes, the edges here. Good. Now, stick this. Using the double side type. ready for shipment information letter on now clean a little bit put everything aside Okay. Bring this to the elevator. Elevators here get in the elevator Down to H where the shipping area is We're down to floor H. Get out of the elevator. Now I'm transporting the item to the shipping area. So we arrive at the shipping area. Download the item. Check. No damage. And the shipment information is ready. Let's take the trolley back. control his back and finish before taking off the gloves" + }, + { + "category": "logistics_organisation", + "name": "User_16_H_0302_2_480.mp4", + "transcript": " Now I'm going to pick up the shipment. First put on the gloves. And take the trolley with me. Careful. This is the shipping area. Now check this is our shipment, the shipment information. Check if they are damaged. Check. So there is no damage. Put this onto my trolley. Make it stable. Okay, and ticket back to the office. Let's go to the elevator. The elevator is here. Now we are arrived. Get out of the elevator. Now we are here. Just unloading. Now, get rid of the Schumann information. Take it out. Take out the folium. Put it away first. And use the cutter to open it. Check the package is really good. Cover out. I'm going to put the computer out. It is pretty good. Not damaged. Pack them, take them out. This original package back in. As well as these things. empty box aside and take it out from the protection cover. Take the computer out. Fold the cover. Put it back to the box. And take off the gloves. Taxi gets finished." + }, + { + "category": "logistics_organisation", + "name": "User_16_H_0502_1_480.mp4", + "transcript": " Okay, I'm going this to upstairs. First, take on the gloves. Release the unloaded thing. Okay, and going upstairs. OK, here. and i put the thing here or yes okay" + }, + { + "category": "logistics_organisation", + "name": "User_16_User_1_451_3101_Logistics_1_480.mp4", + "transcript": " okay put on the gloves we should inspect all these passports before shipping so let's do one thing once we inspect them we can put them to this side so that we know that they are inspected there are zero numbers in the paper all of it uh maybe just check if you can feel something something is broken or a loose part i don't think so and it looks good okay so i'll try this one That's all good. And also here. The sample looks good We should just measure the maximum length so that we know the pitch. So this is 70? Roughly 70 centimeters as well. I see the same dimensions. And I'll do this one. 74, 75. Let's start packing everything in this box. This is the empty box. So what we can do is put this at the booth. Here. Yes, I think it's over this side. Be careful. I think we should tape this. I think I'm in this camera system which is really fragile so we'll keep this here on top. and we don't have anything else to pad at the moment so i guess we can close this out we need to put this inside ah yes let's leave it inside let's close this we can put this now in the crib together and then start packing it yeah okay careful yeah Can you get the cutter? Let's wrap the foil around it. Your build is much larger. Yeah, it's much larger. You can also do two rounds. Two rounds. Yes, I can try. Let's go. yours loose? it's fitting in the wrong direction I think because oh yes you have to put it in this direction yeah just turn it like this or like this Okay. Let's bring it down before we tighten this. Yeah. Okay. Okay. Is that some pattern? Yeah, here we can tighten this. Yeah, I think it's much better. Okay. Okay. Yes, let's put it here. Yeah, it's prepared. Now we can transport it. Take off the gloves." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_1_475_0801_1_480.mp4", + "transcript": " Put gloves on. First, can you open the smaller one? Thank you. Alright. Alright. 11. 14 times 4G. 4 minus... Yeah, it should be correct. I'm not sure if that says 46, but the other is correct. we have different lengths so maybe we can check the zero number from here or yeah I think this is the most important number. So this is, I see that this is the first one is 254. So you can click it. So this one is 1420, 1420 yes. 254 is also there. 500. 254. 254, 1. 670. This is... I can't see it. It's under. I think it is best if we cut it. Yes. So this is 6, 7, 2. Do you have marked? Yes, this is marked. This is marked. You put it here. This is also marked. This is also marked. 670. 500 is marked. Is this marked? Let me check. 920, this is not marked. Which one? 920. Okay. 920. 254 is one marked, right? yes yes how many one two three four five six seven One more, one more. One more that didn't mark. Can you read the length, every page? 670. 670. 254. 254. 500. 500. 670. 670. 920. 920. 920. Oh, 920. Double 920. 1420. Yes. Okay, then this is 1420 again. 1420. 500 500 again here 1420 2050 2050 This one is 1420. 2, 5, 2, 4, 3, 2, 1 is correct. Okay, 1, 2, 3, 4, 2, 5, 2, okay. All the parts are correct? Yes. So you can put this. Yep." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_1_H_3101_Logistics_2_480.mp4", + "transcript": " Okay, I'm gonna put the safety shoes on. Put my old shoes there. Put my gloves with me. Tighten the shoes. Yes, it's here. I'll take it. We need to bring it down to the main door. We have to maneuver this a bit on this side. If I hold it, if I hold it Carefully. Oh, yeah. Thank you. Okay. Okay. Download. Check it out. Okay. Put this slowly back. Okay, so I turn... The shipment task is finished. Take off the gloves. Take off the safety shoes." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_1_H_3101_Logistics_3_480.mp4", + "transcript": " So now we are going to collect the shipment. Put on safety shoes. Tighten. Put on the gloves. I grab the truck and maybe you can help me. Yeah, sure. Start trolling. So this is our shipment, yes. Jackets, everything's good. Yes, everything's good. Package is good. So leave the shipment with the cargo and collect. Transport them. I can hold this. Yes, we should go to the elevator from here. Yes. from the elevator. Hello. Hi. Mm-hmm. Mm-hmm. Yeah, so we're going to download here. So I'll load it. I'm going to return this. OK, sure. Yes, I will go return that shortly. Thank you. OK. So our cargo is collected by this trolley so I'm going to return this trolley back to the shopping center, shipping center. It's returned. Come back to fourth floor, using the elevator. OK. Still on? Start video. so we need to unpack this and inspect all the contents so for that let's untie the belt And put the shillments out. Since there is a camera and they are all sorted. So the path doesn't contact me. There's no damage. No damage. No, it's also well. Let's do one thing. Let's find a place to keep this box in here. Keep it on the table. Yeah, okay. We... No, we can just... We're in there. Careful. Yeah. For the door. Yeah. I'm just supposed to bring all the things from outside. Mm-hmm. Air is clear. Yeah it's clear. It's complete. Take off the clothes." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_2_0111_1_480.mp4", + "transcript": " Safety gear. Safety kit, yes. Okay, and the bedroom, yes. Two jackets, all right. I think you'll have the small one. I can take this. You can take the bigger size. Yeah, there are different size. Should be. Oh yeah, maybe you can. Put it out. Yeah, cool. Over the jacket. Thank you. You also finished? Yeah. Here are some clothes I think we don't need to take the air. And next is find the wooden trolley. If not found use the elevator to the ground floor. So, make sure the trolley is empty, place at the corner outside the elevator as shown, so we just plate it here. In the end, we have to gather all the things in here. Right. So we can bring it to the whole hole. Also, it's a bit huge. We can just put it here until we need the... Find the power cable display and monitors. Find the Mac computer. Mac computer should be in this room. Here's the Mac computer. Yes, and also... Yes, the label is in the room. Okay, so maybe you can look for the power cable? Yes, sure. Yes. I'm looking for it. there's one power cable but i think there are many different No, it's not going to start. It's not? No. So it's defect? Yes, defect. The label, I think I can find the label. Oh, I got it. Oh, right. And... to check so we have to title it's defect and we open is the power connected the power is that this is blocked And this REM card, it doesn't have an REM card. So we can make a note that missing the REM card. And also if there are CMOS, this is the battery. So yes, it's a hard desk. That one? Hard desk? It's connected, I think it's fine. So we're only missing a REM card. So it's defective and missing REM. And find the old monitor and the printer. Yes. Put it aside. OK, we can just here. Find the old monitor, maybe. No, I think it's a picture with a label behind. I think that should be in the room with the printer. In room 410, I think. I would just bring this to the trolley. Let me see the next step. Once, bring it to the trolley. Where do we... Where do we need to bring the... In front of the elevator and then someone will pick it up. Oh, okay. Cool, I will take that. I will just bring the... Yeah, sure. That's better. I'll open it myself. No info 10. The monitor and the printer is over there. we should plug it in it's plugged here yeah it's plugged we can check oh this one i think it's this one right no this one or this one it looks the same White, not on this. Okay, should not be this monitor. No? Okay. So which monitor? We can check this first, I think. So we can check the printer. It's also a Samsung one. It's a Samsung also, right. Plug it in. I think this works. Yes, usable. The trolley, right? It's okay. That's okay. Okay, open the door. Thank you. so we can check which monitor are we going to test server windows pc Let's find the old monitor and printer. Then the PC with handles. Another PC? No, I think these two PCs are these two. It's not here, right? It's here. Here is the PC with handles, I think. How do we check it? I'll go to find the old monitor. Because we are going to find the monitor. I think we can just see if it turns on. No need to. No? OK. Yeah, I think there's four steps. And this step, we need to find the old monitor. We need to mark if it's de facto or usable. Let me start with this, sure. Mm-hmm. Oh, OK. Thank you. Check. Mm-hmm. I think it's working fine. Yeah, and sounds, the fan is working also. Turn it off. Turn it off, black out. So we can mark two nodes. So first is useful. What's the second node? It's OK. So no parts missing. OK. Hmm. All right. Okay. Next one. I think these are all electronic. Oh, no. One monitor. Yes. One monitor and one more... another PC. Yeah. This PC. Find and inspect Mac computer. So we have to check the silver windowed PC. This one. Because this is this one. So we can check if it's in this room. No, not here. Not that one. No. It's not this PC, but maybe this monitor. Monitor seems to look the same, yes, with a sticker. Where's the bottom? Oh, it's on. On? Yeah, and the light is on. Yeah, it's on. So that might be good. So we can mark it. It's good. I might borrow a pen. So park useable. Oh, I got that. You can useable. Yes, return the cables. The cable was in the motion capture room, I think. Right? In the motion capture room. The power cable? Yes. But this one was here. Oh, yes, I mean the power cable. if this usable do we need to put it into the trolley okay No. It's not here. Let me see. Check. Now this one. There's another PC with handle, but not this one. And do you know where is this PC? We couldn't find it. Do you find the PC? No. I see the PC here. Oh, oh, there, right. The PC is here. So in this conference room. Hello. Thank you. Bring the cable. We'll test it function. Where's the power? Oh, here, here. There is one. Okay. Turn it on. Start. Yep, it's good. Both working good. The light's going. The fan is working. That sounds good. I will turn it off. Plug out. Mark it as OK. Should be usable and OK. Thank you. Let's do the trolley. It can fit. Bring it to the elevator and return cable. I can return the cable. Where is the cable from? The cable is here. This is here. The line. Loose it. Where's the label? Oh, it's right here. OK, good. Let me push it back. OK. Now the mechanical devices. I think it's through the video part 2. Video part 2. We can stop recording now. I think it's the same. Leave it in. You mean continue with it? Yeah, I think so. Are your glasses too hot? I think so. Too hot? Okay. We can leave it to part." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_2_0111_part_2_480.mp4", + "transcript": " put the gloves on and first we need to check if the find the height adjustable mechanical frame right so we need to add a node The parts are all good It doesn't have a missing part or something I believe this is damaged. Because you can see this part doesn't move, this part moved. If you can see, right? Which means this is damaged. We need to mark it as damaged and missing some bolts. Yes, missing some bolts. It's here. Both are missing. Okay. Here, right? Yes, right. Yes, both are missing. Inspect and missing bolts. And the second node and the location of the missing part find a no I don't think we should we need to just put a note that they are in this room note the location of the missing part I think it just mentioned where is the bolt belongs to So we should write, like, damaged and missing part. And missing part. Like a... Black bolt. Black bolt, yeah. Two black bolt. Okay. And also we need to find the demonstrator subsequently. I think that's what we can leave it here and then later put it in the channel. Sure. So we need to So this is obviously not functional, so which means it's damaged. Damaged, yes. And check if they are missing part. Yeah, it's missing part, and I believe we need to put a note here like missing a bolt. Right? Right, only one is appropriate. Oh, here is missing bolt, here is not functional. Bolt is already here, just not fixed. Oh, the nuts. The thing for screwing it in. Maybe here. Oh, yeah, I forgot to put the note on the other thing, the location. Yes, the location, okay, true. Make like a narrow. This is damaged, and also I think we put here, a missing bolt with a narrow on it. This one is a missing part. and we need to find the green lamp also check Yes. Inspect the lamp assembly. The lamp assembly seems okay. But there's no bolt. No bolt? No light bulb. Attach the bulb. The bulb is over there. And we need to attach the bulb. Inspect the lamp. I can put it in here. The spring. Oh, the spring, right. Spring is missing. And if we see, what's it? It's here. It doesn't work. There's a defect. So we can put a node like a defect and missing spring. that damage right put it here i think strings oh right okay just put it here and Next, we need to fetch the trolley, unload the devices. I think we can unload the devices over here. I just left it there. Okay. Okay, let's load it. Put it at the corner a little bit. what else Add some prototype bars to the trolley. Add some bars. And then also mark them, right? Right. Okay. To mark one of them. Bind them. Bind them. Right. I want to bind them. Using which stuff? We can use this for the... The bolts and pins. Okay. So we need to bind them with a cord. Just put it aside. using this to bind the Put a label additional bars. I'm going to write a label. Additional bars. Okay. And you also need to load everything into the trolley, carry to the elevator, and wait to be picked up, be collected. But now that we are here, we can already, I think we can take our power. Now it's just pushing the trolley. Because we loaded everything already. I think we have to at the moment when we're waiting for the elevator. Oh, that's true. Yes. Waiting for pickup and the meantime we can Stop recording. Thank you." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_14_451_0402_1_480.mp4", + "transcript": " now we are going to put on the jack safety vest take a bit of salt okay And then we're gonna put the, wear the safety shoes on. Okay. Tighten them up. All the shoes away. Okay. Now, next, I'll put the gloves on. Yes. There's a few shoes also. You can put the safety shoes first and then put the gloves. It'll be much easier. So safety kit is finished. We can then take this box and put it away. Take it off, take it off. Put it on the ground. I need to empty this. Check. Yes, empty the current content. And put it on the table. Be careful of them. I can give you, you can put it off. be careful and this also be careful don't let it fall and push it and then this is the covers I will put it aside to make it more like a room of that now We need to put this on. Yes. I think we have to put it, oh wait. We can check how much weight is this empty box. Can I read the number from there? There, over there. Hand off. One more time. No, you don't need to touch it. 3.7. You put it down here, 3.7. So we need 2.2 kilogram stuff. We need to weight each of them. Oh, single one is 5 kilogram. So it's the lighter one, maybe. You can check, how much weight is yours? How much? 4.7. 4.7 is a little bit. I will try this one. 2.5, this is good. So we can... Do we have a very light one? all of them are heavy It's 1.3, we can put this. Okay. So then two together is 1. Yes, together will be five point something. Yes, yes. We can close it. Yeah, we can close it. It's about 5.2 and then we need to make it more secure place some things Maybe like this. Something like this. Make it more secure. It's not enough but... Now let's see if we can pack it. Yeah, I'm checking the instructions. Yeah, we should, the others put back into the cabinet. So we don't need something, so we put it back to the cabinet. We need to pack the package. Okay, sorry. Now we need to maybe after that was the label. Yes, it's pretty tight. I tie them one more time. It's already there. Oh, it's already there. One more, because I already take it out. Shipments. Good. What are you doing? Okay. It's tight. Yeah, it's tight. Cannot move. Good. And then secure and put the shipping label. The shipping label is also on. Now we are going downstairs to find the trolley. Yes. Now we're going to use the elevator to go downstairs. to the floor H. I'm going to grab H. Looking for the trolley. And it should be over there one. Let's go find it out. There's just not. This is the trolley. Maybe we can use that after the finish. Oh, there's one. Nice. See connection yes, we can use this one And there is the position we are going to go and Yeah, let's go downstairs. Okay, I'll click four. Okay. I can handle this. Great, thank you. Nice. Lift it up. type one more time in case it dropped make it secure I think here we also need one more make it secure good Now take it out. You can be after me. So back there. Thank you. Good. Go through this door. Get into the elevator. Go to H. Whoa. Okay, no problem. Now we arrived at the floor edge. Exceed the elevator. Careful. Turn around. Thank you. We need to find a place. I think we can put it more inside. It's more secure. Let's put it more inside. I'm gonna put it here. Yes, so we arrived the shipping shipment area and unloading. And we're going to put the trolley back here. Now we are finished. I have to untie this No, so we are finished We're going to went back We can get here. Now finish our position, stick off the gloves. Shoes, shoes, yeah, that's right. Take the vest off, take the shoes off. Nope. Nope." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_14_451_0402_2_480.mp4", + "transcript": " So in this recording, we are going to collect the shipment. The shipment's ready from the... Put on the jackets. It's mine, huh? Yeah, it's mine. Okay. Put the safety jacket on. safety vest on and put down safety shims make it tight put on the gloves Okay, I'm going downstairs to collect the shipment. Go through the elevator to go downstairs. Roll H. Sorry. To find the petroleum to pick our shipment. Go this way. So this is our shipment. This is our shipment information. And check if they are damaged or something. They are alright everything. It's fine. It's alright. So I can pick the trolley here. Collect them. Yeah, this can go. Yeah? Use the elevator to transport the shipment to fourth floor. in front of me. All right. Hold it, hold it, hold it. Right here. Yes. Unload the shipment. Unload. I'll put off-site. Here for a while. for that we unpack unpack this first loose the belt Yeah, we need to be careful, be careful. Use a knife to open this. It's opened. I'm going to collect them together. And this one. Now we check the shipment stuff. Put it on the table first. And also here is one. So I'm gonna check if they are damaged or something. So it's good. That's good. And check this one. Looks good, we put it on the cabinet. It's supposed to be here, I think. And here is one more. Where? Here? Okay. This belongs to here. Yes. Now we'll check if anything left inside. No. What about there? Is something left inside? No. Underneath? No. No. Okay, good. So we are finished with this. And check the instruction. Do we need to put this into here? I think yes, we have to put this stuff inside. And put this back. Okay, nice, thank you. So this box is emptied, the shipment is finished, I think. Should we put this? We can put this into the box to collect, to store the thing. Yes. Okay, be careful. because some of them are not so packaged, in case some of them are not packaged. You have to be careful. And last thing. Pack them. Store them. Use the box to store things. Can you help me with this? Lift it. Okay, go. Great. Now, we'll take off the gloves. Shaman is finished. The best I'm sure is." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_14_451_0502_1_480.mp4", + "transcript": " Now we are going to put on the safety things. This is my vest. So next is put on the safety shoes. Safety shoes. Okay, put my old shoes away. Tighten the shoes. Good. Next put down the gloves. Okay. No problem. And another head. take off the gloves and put it out later okay now put them aside and take this and take this in the middle yes and we put this on this is on and next yeah open this I think we have to just take out some garbage, useless things. This also will take it out. And now we inspect the item we want from the cabinet. We can check one by one, I think, from your side. Yes, it's the same. Yeah, that's good. Put it into the box. 4.7, okay. You can put in the, I'll check this. This also looks good. Okay. 6.1. Then we continue. We'll take 10 of them. I'll check it here first. it will find the position like this. I'm not sure where, just check it. It's also, we can check it right now. So if they are. They're not the same because we need the cover from this side, so we don't use this. You can put this back. Put it somewhere else, like here. And you can check another one. I'm going to check this one. You can take another one for check. And this one looks good. And I'll put it inside. OK. And then check the next one. This looks, you can turn around, maybe? Oh, this is the same. Pretty much the same. It's a little bit different so we can use another one maybe yes, this one looks the same Not hundred percent the same we can store it later This is not so hundred percent The same, we can check. You can see this is a little bit gap. This is without gap, right? Yeah. So we can just use another one. Yeah. Okay, I'll put a cover in. No, wait, wait. Put the cover in. Yes. Okay, we'll put the cover in. We can check another one. What was that? This one, right? Yeah. Just put it back. It's this one. Okay. Next, we can check this one. Is this one the same? I'm not sure. It's different. It's different. Okay. Next, we can check this one. I'm going to check this one. This is not the same so I'll put it back. Yeah, this looks the same. Yeah, just different color, but it's all right. 4.568, I think it's okay. Now put inside. This is, yeah. It's not totally different, but I think it's like a, yeah. Yeah, some gap here is a little bit different. You can choose this as backup option, alternative option. Let me check another one. Yes, okay, check this one. I think a lot of them are like this. Put it here for backup. If we don't have the item we want, then we have to use the backup options, I think. This is not the same. Yes, we need to temp items. So let's check if they are enough. It's too heavy. Oh, it's totally fine. You're right. Okay. I believe these three are the backup options. We can check from underside this, maybe. Check it first. There are also the gap one. Second one. I will quickly check which one we want. You can check from there and go check from here. No, they also have a gap. Most of them have a gap, I think. And just put it here, and check that one. It's here. Also have a gap, right? Yeah. So I think we have to use the backup options to use this with gap. Yeah, so we can take one by one. There are already three of them. 6.1. Let's check one more time. Yes. It's very similar, only with gap. Tough to choice, right? so this is defact so we have to use this here's the backup options 4.6 or 7.5k six point one five five eight four eight six one four six We can close them. So since we have a, can you please just hold this like this? Yeah. I mean, I will cover this up. Thank you. Okay. Good. Now we... Okay. Oh. No, no, no, no, no, no, no. From here. Okay. All right. You good? Okay. I think we have to cover the edges. Now on this side also. And now, we are going to put the shipment information here. This is the double tape. This side tape. You can take it off the gloves and do this. Okay, we put the shipment information onto here and check if they are good package. Yes, they are good package. Yes, I think so, yes. Okay, this is too short. This is too short, we'll use that yellow one, yes. Just go from here, go from here. Okay, so Tie it up there, maybe, a little bit, if it's able to. Just one little one. How to tie this up, I don't think. I think we can do this. I thought it would be like a dead end so it's stable yeah good that's great so now we're finished with the first part the shipment" + }, + { + "category": "logistics_organisation", + "name": "User_16_User_14_451_0502_2_480.mp4", + "transcript": " Just press once. Oh yes, it's on. Okay, now we are going to shape this, the shipment. I'm going to bring this here. Okay, now. Good. Good. Now we're going to ship it outside. Be carefully. Be careful. One thing, do we need to keep that out? I think we should turn it off. Maybe you can turn it off. Maybe we can turn it off or don't. I think we have to. OK, you can just wait for me a second. OK, so we can continue. First, we have to turn off the light, right? Thank you. Be careful. You okay? Okay. Good. Good to go. Thank you. I'm going to turn this. I think it's OK now. Okay, the elevator is here. Yes, carefully. Okay. H, yes please, thank you. Careful. Okay. We are going through this door by using Like this. By using this to put it up. Also here. Put this up. Here. And just push. Okay. So here. Okay. Great. I'm going to put this out. Put this here. Into the shipment area. Unload this. Maybe we'll close it a little bit. In case it's too windy. Yeah, just a little bit. OK, OK. Now we'll unload this. Waiting for the collection. OK, finished." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_14_451_0502_4_480.mp4", + "transcript": " It's on. Now we collected the shipment. Open this. Oh, there it is. Okay, good. Now we untie them. Just a cutter. No. What's wrong with this one? It's a protection or something? Oh. Okay. Yeah. Okay. So we'll just use it for now it's opened we're gonna check if the item is okay or not inspect the items first I will go start from here I'll put it inside the cabinet. Yes, sure. This looks good. It's clean, good. You can put it here because you have to weight it. That's 4.472. Okay. So put it here. this one this looks good this looks good oh this is the same thing 4752 six one four six one four five four six it's also the one 5848 here we go put it here good one zero four looks good 6152. The label is good. It's good. Same item. Okay now. Let's put it here. Okay. Let me put that also inside here. S1S. Close the cabinet. It's all sorted. Now, wait a second. We put this in. This. Okay. Put this in. And also, the big one. Put it back inside. And we close them. And next we, from this side. Yeah, from this side in. No, like this. Oh, thank you. So we finished inspection the items. Now we complete. Take off the gloves. And the shoes. And also the vest." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_14_H_0502_3_480.mp4", + "transcript": " okay now we are going to collect our shipment okay here is our shipment let's check if it's all good so this is all good so get the trolley Okay, I'm going inside. And close the door, close the gate. then you have to close it yeah okay good the doors closed also i'm going to so Okay, nice. The elevator is here, so we... carefully put the... To the elevator. To the fourth floor. No, thank you. Transporting the item. Thank you. Next, also this door. Can you open the door, please? Thank you. And that's it. We're unloading this. Thank you. Okay, I'll put the trolley out. So the shipment is finished. Put the trolley here. and come back there close the door and the cargo is here it's safety is okay so we'll successfully collect the cargo item" + }, + { + "category": "logistics_organisation", + "name": "User_16_User_14_H_3001_1_480.mp4", + "transcript": " Okay, so put down the gloves. We also need to put the safety shoes on. This is my shoe, this is yours. Okay, put the shoes away. I'll put my shoes here. And we're going to collect the card, yes. Yes, we are loading these things. It should be done. Done, like this? No? OK. And? Like this? That's okay? Okay. Upstairs. Yes. Oh, OK. Fourth. We can put over here first because we don't want to put in the middle of the hallway. And we're going to turn on the light and close the door. And we are going to transport this table. So first, we need to take it out. Yes, we need to fully and cover this. Is it on? Yeah. Maybe, yes, we cover this leg first, put it all the way in. I mean, extend. Expand. Yeah. Cutters. Okay. Okay. Like that. cover it to protect the surface in case of any damage. And also here. Do the same procedure. Cover carefully and also the upper side. We will use two different sides. First is right side. And I will also cut this. Cut this. And protect here. Carefully. And also here one more time. This needs to be like one to the left. Adjust it a little bit. Yes. Hold this. Yeah, hold it like this. And we'll cut. Cover the... the legs we don't need to move Put the shape information here. Stay tight. Yes. And take this. Okay. let's go and take this side and open the door careful And then put the inns up here. Yes. Yeah, good. And we'll tie them. Bind them. Let me think how to bind this. in the middle. I think I was from here. Yes, like this. So here to here. All right. Is that tight? Yeah, it's tight. Yeah, this is also tight. And also, yeah, the elevator. Yeah. Yeah. H. Oh, you type like this? I can. I will later change my type to yours. I didn't get it. No, no, no. We type a different way. So we have to change it a little bit. We can do it later. Let's go. Oh, you want to turn around? Careful, no problem. OK. Here, I think, yes. I will try to turn this around. Yes, and unloading. Okay, pull it out. I will change my time. No, no, you don't. You don't need to. I changed it to yours. That will make the shipment more stable. Yes. Test. Yes. It's not moved. Tighten it. Tighten them again. Tighten them tighter. Yes. Also this one, make it tighter. Good. Now we put this back. Put this back. We'll put this back. Yes. And you can put it here. and we're coming back So the stuff is fixed, ready to shape and tightened and packaged. OK. Now we take off the gloves and take off the safety shoes. Hit end, finish." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_14_H_3001_2_480.mp4", + "transcript": " Okay, now we are going to put our gloves and also safety shoes. Okay, now I'm going to collect the card the trolley To pick up the shipment Take the trolley. Okay. to pick up the shipments and transport them to our office, to the office. OK. All right. Okay, it's loaded now going to go into the elevator Upstairs you can have a look if the thing is good this thing is good and also good protected with the shipment detail We can put it here first. And we unload and put this. Hold this. Thank you. No, I can take this. I can take this. And we put this down. Just put it here for a second, I think. Just put it here for a second. And carry this. Enter the room. And then put it down. Good. Close the door. And unpack the list. Put it out. Nice, careful. Okay, put it away. And get rid of these powers. Oh, here. Also here. Yes, and then I will try to put the clench on and try if that working properly. When taking anti-clockwise, it will go up. Clockwise, it will go down, which means the table working properly. Turn off the door. Close the light. Turn off the light. And close the door. Carry the thing. Bring it downstairs. to orange We arrived at level H. One side. Put this back. Lower it on the ground. Okay. Now, put it back. put this card back to where it belongs okay finished Yeah, yeah, yeah. So we have finished the logistic shipment class. We should take off the gloves and take off the safety shoes. We can finish. We'll finish." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_17_H_2701_1_480.mp4", + "transcript": " Okay, I need to put the safety shoes on. put on gloves Now, here is the trolley. We need to unload and empty the trolley. Let's check out the hack elevator. Hmm? Force? Okay. one by one? and we get scissors oh here, there's a cutter Okay, no. Right, inspect, answer. I know this. This is heavy. Okay, now next is this computer. Okay. Always. Yeah. Okay, it's loaded. Lock it. Throw the garbage. And put my thing back. turn off the light open close the door also this door need to be opened okay Yes, it's h. Target position, yes. This wheel is not movable, so like this. I think turn a little bit more. Yes. Or further in? A little bit further in or just like here? Yeah, it's fine. It's not locking the door. Yeah, it's finished. Gloves. Gloves. Gloves." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_17_H_2701_2_480.mp4", + "transcript": " Put down the globe first Later we will move this big PC into the office. Check it. Is anything loose or something? No? Everything is good? Yeah. And we're going to transport this to another floor. Yeah. I don't know. Turn on the light. Yeah, sure. Okay, now I think we have to lock it. It doesn't have a lock here. Oh, maybe only the here is locked here. And then this one is locked. Okay, now turn off the gloves." + }, + { + "category": "logistics_organisation", + "name": "User_16_User_17_H_2701_3_480.mp4", + "transcript": " Okay, now we're going to transport this. First we are going to put gloves on. Okay, so you can hold it. Okay. No. Put it up on. open the door, turn on the light I think we have to go which corner? this corner or that corner? I think it should be this one right? close the door I think it's this one. This one is the same I think. From the instruction, does the photo show there is any red wire? No, right? Okay, let's try. I will open the door. I think I can touch the... Can you? Yeah. I can turn it off. And connect good, good. now I will transport the wooden box to boxes Maybe you can give it to me, like, one by one. I will go up. OK. OK. Okay. Okay. It's finished. Inside. Alright. We are finished with this. Okay, the Lovel, the shoe, the gloves." + }, + { + "category": "logistics_organisation", + "name": "User_17_410_0810_1_480.mp4", + "transcript": " doesn't fit and there's another and some screws These are also iron bars. and then we will fit this empty box again to the shelf This clothes will fold in place right here on the sofa. Here is some tools. And we will place on the desk, working desk. And some garbage on the floor. We will put them into the garbage. and we have to clean the desk there are some blue boxes empty bottles tools and some wire on the ground first let's put these boxes together and to the other shelf oh there are some harem bars here so first put the boxes on the floor and clean this shelf these are places for the wires charging wires so we put them together here the bars to the cabinet. This is not the bar. Let's build it on the desk. The shelf is empty for now, so we put all the blue box here. And on the shelf there are some empty bottles, screws, batteries. We first put the bottles together. And for the batteries, we collect them and put them here, right near the window. We put all the batteries here. There's some 3D print stuff. Let's collect them. And put them into the blue box. Here's another blue box. We'll put all this print stuff in the blue box. And put them back to the shelf. these are some other iron stuff and some garbage bottle cap we put the bottle cap to the garbage and all this iron stuff we put it on the desk the wires on the floor is broken out of the way and this this one this one move it here and first collect wires we roll them together and let's put them on the desk this ladder we first fold it fold it and lean it let's see here and the chair will make it to under this desk there are also other wheels let's roll them together There are two wires, different wires. Also, we put them on the desk. And these charging wires. We collect them on the desk. There's some garbage and a mouse. put it near the monitor and some tape we put it on the shelf in the garbage here so next we will clean this platform There's some glue and screws and a small part. We clack them into this box. It's a plastic ring. And the ruler, no, it's an iron plate. Let's put all this iron stuff on the shelf. with the tape and the other iron stuff. The rest of the used tape, it belongs to the garbage. and there are some batteries here and some other small screws we put them back on the shelf in the box This is, this belongs to, this is a lamp. Yeah, we just put it here. And tools. Tools on the desk. And tools. in the box on the shelf glasses we put them together this plastic stuff we put all this together here. So we will clean with this part on the shelf. Screws, pins we put on this floor. some cable. We put them on this floor. Pins, screws, any other small part. We collect them and put them in the box. These are some plastic and some bottle cap. This is from the pen. we put this plastic here with the others and the bottle cap garbage and the rest of the pan we put it here something moves this floor here is another here are some gloves and some black 3D print stuff we will put the gloves with the clothes on the sofa and this black print stuff we will put here with the other plastic stuff there's another empty oh that's a full box with chargers lines cables connect We put them in the cabinet. Here is some wooden stuff. with different colors. We collect them. Here, there's also some on the desk. We put them in this black box. there are also some iron stuff and a bottle of iron plate let's put it under here and glue here need some garbage and a used spoon let's put it in the garbage and it's one too here is a switch or some random stuff, let's put it there some little elements put it on this shelf here in this box and we are going to clean the working desk with tools and all the other stuff we are orienting the screws we will put all the screws in the box on the shelf but we will leave all the tools on the desk. So we first collecting all those screws. There's a box of smooths and the other parts. So yeah, we'll put it here. Batteries on this platform together. We put the tools together. This pen, this pencil we put on this task desk. all the tools will put it here and this iron stuff with this frame oh there's a tool tool on the desk And this we will put here. This is a plastic cylinder and a ruler we put on the desk with all the pencils and other tools. This wood here in the black box. This cleaner belongs to the tools. Here's some plastic tape. And some garbage, paper, used paper. We're bringing them to the garbage. Some scissors to the tools. Some bags, wires. We put the wires into this gray box. And we'll pull the gray box. Find place on the shelf here. Use the tapes. Plastic print stuff. There's a blue box and the used tapes. We'll put here on the desk with a pencil. Here's some bottom we will combine them together with this black box it's a switch and we roll the wire put them on the desk do some other plastic stuff here in the black blue box There's some paper, there's some file. With all the papers. We'll put them on the desk. under these tools there's more plastic stuff here belongs to the blue box This is another tool. Red toolbox. And some component. A switch. We'll put the red toolbox here with the tools and the switch. we put these two switches together on the desk there's some clothes we fold them and pull them on the sofa Here's another iron bar. We put them in the cabinet. It's heavy iron stuff. we put it here with the others and behind the desk there's more to be cleaned first we move this shelf on the floor there is some plastic and more wares here there is some wooden cube We put them in the black box. And this plastic. We put it here. iron bars battery a big iron bar we first put the bars on the sofa and put this battery to this platform. Here we collect the wires together. We roll them together and put them on the desk. This red wire connected to the computer, so we put it here. The other wires, we put them on the desk with the other wires. So we move this shelf back. And these bars in the cabinet. Here is another switch. A button. And other wires. Cables. Into cubes. We'll put them here. and the cables will put it where it belongs but it's connected to this machine so we put it here with the machine here is a box for the plastic So we'll move this plastic in this blue box to that box. Here are some glues. We'll put it with other tools, pencils. Here's another glue. We'll put them together. Here's another plastic plate. we put them in this box so finally we will clean up this desk so there's a glass and a cell phone we put them here with the pencil and other tools. There are some pens and a cup. and some garbage some plastic any other stuff we first put the pins to the desk and garbage and some parts iron part plastic part we put plastic part into this box and iron parts on the shelf that garbage here here's a glass we put in on this platform the screws on the shelf here with other screws or in this small box. These equipment we will leave it on the desk and the yellow cup we leave it on the desk the mouse and the keyboard we put it here and there's some pen plastic notebooks We'll put notebooks and pen on the desk and plastic. We'll put it in this shelf. There are also some wires. We pull the keyboard out. animals near the keyboard. This will put here with other papers. there is some plastic stuff we put it here now it looks like garbage so we put it... where is the other garbage? We put this model on the PC in this lamp. we'll change to this side towards that side and the cable we'll put it here there is some other plastic bag and other equipment we will leave it here and the travel case we will leave it here and also the plastic bag So we'll close the door. Hold on, there's another iron bar. We'll pull this iron cable back. And try to close the door. And we look for a small part, element part. put it here in the box and we are looking for the others there's some plastic garbage Reorder the tools. So. some wires still on the ground we roll them and put them on the desk here is a plastic board this should not on the sofa so we will put it here in this corner next to the sofa And there's some garbage on the ground. No, we cannot remove them. So we have cleaned this room. There are some sockets. We put them in the cabinet. with the other wearers carry a boast failure and close the door here we finished take off the gloves And stop recording. Gloves here on the sofa." + }, + { + "category": "logistics_organisation", + "name": "User_17_410_0910_1_480.mp4", + "transcript": " Today we will take some photos about the robot arm. So first we will turn on the light. And here is the robot arm. There are some tools besides. So we will clean up at first. We will set all the tools back to the toolbox here. And there are also many parts on the desk. So we get them together. Open the toolbox. Put all the bars back in the right position. This is too small. We will find the representation to each part. we are fading in the right position based on the lens there's some other tools belong to the toolbox and this, so definitely here and this one here There's some other tools on the desk and the board. This one, we will match the picture here on the board. We'll place the unrecognized tools aside and find more. We'll match the size first. and we'll find more tools. There's still left some pencils. We will find the right position. This could be a ROM session. There's a hole here. Doesn't match. Let's put it here first. There are still parts missing. We are looking for the rest parts. This doesn't know here Where's? Let's put it here first. And we still find the other parts, other missing parts. Other than the cabinet, remove the ladder first. No. We couldn't find the other missing part. So let's just finish this with some empty position. This one's here. This belongs here. And this one. We'll put it here at first. or here. So we managed to replace some of the tools. And we close the toolbox. And put the toolbox back. Now we want to continue to take some photos about the robot arm. We'll find the tripod first. We will set the tripod first and then put the camera on this platform. So first we will extend this part to get a higher position just a little bit on each one of them. We have to make sure the platform is even. It's like it's in the same level. So we'll focus on this bottle bubble to make sure this bottle is in this circle. So now it's not right. And we can use it to adjust the height. Here the bubble is in the circle. So we'll fix it. okay then we'll put the camera here on this fix the camera on here on this socket so let's first pull this one out And the camera is in this cabinet here in this black pack. we open this pack and here is our camera and first we will check if the camera is working we turn it on nothing happened so we check here there's no battery and there's no SD card so we'll find the battery and storage card first here battery and storage card. We'll place them right. Is this the right direction? Yeah, it will fit. And camera here. Let's try again. yes we can see it starts But we want to get a more close photo, so we will replace this lens with a bigger one. Here we push this button. Twist a bit here. lens is out and we pull the cover back and new lens is here the pin is here so We hear a click and it's on. And we'll put the cover away. And also we don't need this socket. We have one here and we will place it we put it on the platform this is longer edge so it's here to this direction and here click and the camera is on the platform So we'll first adjust the position of the camera with these handles. And focus on the robot arm and turn the camera on. See it's clear. And we'll adjust the height with this handle. We'll make it a bit lower. And we'll focus on the robot arm and take some shots. We'll make it higher. it's like at this angle for another shot okay we finish our task and we will set everything back first we will put the camera on of this platform and pull this down switch to the original one close the camera turn off the camera and remove the lens and change to the original one so first we click this button and this cover and pull the lens back. And we will take off the battery and the SD card. And put the camera back. Check the cover is on. And this back to the tripod. And down this platform to the original position. And we finish our task. The bag returns to the cabinet. And move the ladder. And it's finished. Turn off the light." + }, + { + "category": "logistics_organisation", + "name": "User_17_414_2701_4_480.mp4", + "transcript": " so now we're going to move these big large kits to the first floor so first we need to take on the gloves and release the brakes here and here so now we can move these and open the door and go for the elevator Getting into the heavy elevator and yeah. And also lock the wheels. Yep. And use the brakes. So here we are. So we just leave the case in front of this door. So the gloves off." + }, + { + "category": "logistics_organisation", + "name": "User_17_414_2701_5_480.mp4", + "transcript": " so now we have to return this letter return this to where we get it so first we need our gloves and we will bring it to the elevator and go downstairs So go to this floor. Yep, so here is a place. And we will first open the door. So we say keys. and turn the lights on and here is here is where we get the ladder so we'll put it back here yep so the task is finished And we have to take out the gloves." + }, + { + "category": "logistics_organisation", + "name": "User_17_451_0402_1_480.mp4", + "transcript": " so today today we're going to pack this pc into this box and deliver it downstairs with this trolley so first we need to put on this protect shoes and empty this box first we need to cover the PC with this plastic and put it between this we can put this one no it doesn't so we can put the pc in between yep and then yeah so now we put the PC into the box and there's still some room here we need something to do the padding there is some plastic plastic here and go insert so the PC will now move And also this one. so we can now try a little bit so the PC is fixed and now we need to close the box and seal it with tips Like this one? and also put this paper on we can use some double side tapes here and now we have to deliver it to the trolley and we need to lift it up so it's a little bit easier for us to put it on so lift it down so now we have to deliver it to the downstairs and lock the wheels So we drop the box here. So the task is over." + }, + { + "category": "logistics_organisation", + "name": "User_17_451_0402_2_480.mp4", + "transcript": " so today we need to deliver this box to the upper stairs to the room so first we need to lift up the trolley and put this box on the trolley and lift it down. Yeah, and we will take this elevator. Lock the wheels. Lock the wheels. and we'll get this stuff out of the box first we need to also lift up the trolley and just leave it down and put it here so first we remove this paper and also the tapes and first this is padding stuff and we will pull this PC out And remove this plastic package. And put everything back into the box. Not this padding. And yep. and you remove the safety shoes So the task is over." + }, + { + "category": "logistics_organisation", + "name": "User_17_User_1_0411_3_480.mp4", + "transcript": " Bye. The next thing we do is to check the hubby here. I think we can then move on to the next place. We wanted to first find the computers test them. in this one. I did not start. So keep this with you. ok and then let's see again ok so the battery is missing these cables are also unplugged so the RAM is also We need to check. So first I can see that the base is not clean so it is already damaged. It's not stable. the battery is already loose but there is a second battery here so this is an extra battery power cable, data cable, I think it's in both I can't see any new spots, but I think we should check this later. It's working. Just turn it off. Cards, okay. but it is also damaged because the base is not proper So this one is small. It should be here, there. now there is a load paper I'm sure it is running unusable. add missing electronics and monitor There is a battery in. The monitor is usable. The power table. No it's the other way The data cables are no there's no there's just one data table connected to the motherboard say cable missing or naturally yeah first usable and yeah I think. Yeah. Oh, so the battery was missing, which was added separately. No, no. Is this all? I do not start, I think. So, it is... There is a second screwdriver. There's just one left. Yeah, it's already loose. Yeah, it's loose. So yeah, we can just see that the RAM is missing. Yeah, the RAM is missing. OK, yeah. Thank you. Yeah. The monitor? You can put the monitor here so that we have space for the other one. No, it doesn't work. Yeah, this one. The other one is here. Can I bring the... Okay, so that's all, right? Yeah. So do we have to close it? Yep. Here. Next task is with the mechanical devices. First we check the high adjustable frame in the other room. I've got the paper tape. Yeah, it doesn't work yeah it's going horizontal just with this part only with this part so let's check if we can repair it so we need an arrow keys You have to... We have to remove all of them already. Now we are just going to fit the boots. Let me check again. Only this part moves. Then you need to add damage. No. This one. The gloves. It's just no first thing. yeah this is living yeah so i think we need to add um yeah Cheers. the green lamp additional bars we need the green lamp No. If it works, no. It's not all. Yep, yep, it's not all. OK, this works. because this is string should not be no this one this one yeah this one is wrong because it is just falling it cannot stand let's see okay now it's a little better but it is still not stable no not stable so So you can add working, but not stable. Maybe we can just take it off. So we have to... Can you turn it like this? No, we need to pull it. Put all these here. Yeah, OK. This one. Yeah, yeah. Careful. The table. No, yeah. Go there. this one uh can you also add yeah this is not stable yeah the lamp we have to remove the bike because the bike is working This is how I'm doing. Yeah, it's over." + }, + { + "category": "logistics_organisation", + "name": "User_17_User_1_H_2701_6_480.mp4", + "transcript": " Thank you. Yep, and just gloves. Our task is to sort and store these electronic parts and deliver them to the appropriate place. to the 4.5 one. And I have to open it over. And also turn on the light. And also this door. And also the lights on. We need to take it from here or? so we'll put it down And this one, here, this side. And also this elevator. So here is also a sign for an inspect. Yeah, here I need to see what is it in. Yeah, it works. let's also put it down for these we need to this is clearly broken because it used to be inserted in this hinge I think this might be damage beyond repair. Is there a power cable? Yeah. So... Where is it? Here. Sorry. Lock the hatch. Yep. So where should we put this? Yeah. And we can, yeah. It should be clean once. Yo, there's some trash there. To measure rubbish and also the scrap pots. So we should put it here or here. We have to put these bare metal and bare parts in this. So what we can do is first just start placing all the parts in here. Yeah. And hatch. Yeah. There's a cable or something. There's a cable, okay. let's see yep just this here and hatch yep Uh, yeah. So, the wheels unfortunately are locked in this direction this will hit that place Staying steady. Yeah. So a change. It's ready. Yeah. Yeah." + }, + { + "category": "logistics_organisation", + "name": "User_17_User_15_451_0402_1_480.mp4", + "transcript": " Go on, it's over This one? Mm-hmm. This one? Yeah. Can you set it down? This one's pretty good. and we still need some place here And this one. No, it's a trolley. He has to be able to somewhere here, I guess. Perhaps we'll just stand to wait for nowhere. There. I will look checked out of the elevator. Nope. I think they take some time. Let's take him some time. Perhaps he comes from there. Ah, this one. There's a... There's a double-size tape here. Do we need to... Yeah, there's also... Oh, already some double-size tape here. I would go downstairs and check about that. Can we lower it more? I don't know. Yeah. Yeah, I think. Can I move? Yeah, okay. Yep. I got it. Thank you. Yeah, it's over. That's okay. Thank you. you Bye. Yep." + }, + { + "category": "logistics_organisation", + "name": "User_17_User_15_451_0402_2_480.mp4", + "transcript": " Yeah, I can hold this. I can hold this. So this is, yeah, right there. This is, that's a false one, or? Yeah. Yeah, that's simple. Stop. Is everything... No?" + }, + { + "category": "logistics_organisation", + "name": "User_17_User_16_H_2701_1_480.mp4", + "transcript": " Thank you. And also the gloves. Yep. to empty the trolley turn it around so we have to move all this stuff to this trolley So, is it empty? Lock this. So I will first open the door. Hmm. so we open the door and turn on the light and we need to load these monitors and printer to the trolley first open the hatch and this one We need the tape. So we have to load this. Yeah it's really heavy. You'll need to... yeah it's the wrong direction So now, yeah, these are all loaded. You can close the hatch and lock it. So what else? And we have to push it back. Yeah. Here. Yeah. It's each. Yeah. It's four. Yep, so now we have to park the trolley to the original place to here, right? And the hatch should be, go from the outside. Yeah. yeah it's fine it's fine it's not blocking the door okay so the gloves off" + }, + { + "category": "logistics_organisation", + "name": "User_17_User_16_H_2701_2_480.mp4", + "transcript": " So I should firstly take on the gloves. And we're going to transport this to another floor. So to the 414. Do you have the keys? So we put it there. Yeah. lock the wheels. It's here. Only one lock? No, okay." + }, + { + "category": "logistics_organisation", + "name": "User_17_User_16_H_2701_3_480.mp4", + "transcript": " So first is gloves. So we can, yeah. Do we need to change the shoes? Let me check that one. I think this one, you can see there's some filter or... Yeah, there's some air conditioning or... Let's try if you can if you can get on and reach the camera if you can't reach that camera we can switch to another yeah and hold the ladder Yeah, can you? So is there a clamp? Yeah, I think that's all. Yeah, we need to move these, all these. Yep. Yep, it's just steady. There are two small ones. So we should put it there. Okay. That's it. So... Thank you." + } +] \ No newline at end of file